Automatic Control Sensors Trainer
(CT-011)

1.Breadboard module, 2.Heating and cooling module, 3.Weight scale to analog converter, 4.Load cell module, 5.Input/output module, 6.Inverter & Non-inverter AMP, 7.Comparator AMP, 8.Lamp/Buzzer module

  • Measuring linear distance
  • Measuring the Speed of a Rolling Object
  • Detecting objects using emitter and collector
  • Detecting black & white Colors
  • Detecting non-metallic objects
  • Detecting metallic objects
  • Detecting Objects using proximity sensor
  • Load Cell
  • Retracting cylinder
  • Position Slide Module
    • Resistance range: (Rn) 2.5 kΩ /100 mm distance
    • Resistance tolerance: 30 %
    • Electrical distance: 50 – 500 mm
    • Independent linearity: 2 %
    • Resolution: < 0.1mm
    • Load resistance: > 100* Rn
    • Max. load current in case of fault: 5 mA
    • Typical supply voltage: 5 VDC
    • Lifetime: 50 million cycles
    • Travel speed: ≤ 3 m/s
    • Cable connection L: 46 mm; W: 10.16 mm
    • Max. measuring distance from magnet to sensor: 2 mm
    • Type of mount Adhesive film
    • Operating temperature: −10°C ...
      + 70°C
    • Protection class IP 65
  • Rotary Encoder Module
    • Power requirements: 5- 24 V DC
    • Power ripple: max 3 % rms
    • Power consumption: max 60 mA
    • Output type: Transistor
    • Shaft allowance load: radial 5kg, thrust 3kg
    • Maximum revolution: 5000 rpm
  • Hall Sensor Module
    • Product type magneto resistive digital position sensor
    • Package style plastic bushing
    • Supply voltage: 6.0 Vdc to 24.0 Vdc
    • Output type sink
    • Termination type: 152,4 mm [6.0 in] stranded lead wires
    • Magnetic actuation
    • Operating temperature range: -20 °C to 85 °C [-4 °F to 185 °F]
    • Output voltage: 0.4 Vdc max.
  • Motion Detector Sensor Module
    • Range: 0.15 to 6 m
    • Resolution: 1 mm
  • Rotary (Photogate) Sensor Module
    • Power requirements: 5v DC at 40 mA
    • Infrared source: Peak at 880 nm
    • Output is high and LED off for unblocked gate
    • Output is low and LED on for blocked gate
    • Beam approximately 9 mm from the end of the gate arms
  • Optical (Emitting) Sensor Module
    • Type: Small and light (old) type
    • Sensing type: Through Beam
    • Sensing distance: 5 m
    • Operation mode: Light & Dark
    • Control output: PNP
  • Optical (Collecting) Sensor Module
    • Type: Small and light (old) type
    • Sensing type: Through Beam
    • Sensing distance: 5 m
    • Operation mode: Light & Dark
    • Control output: PNP
  • Optical (Main) Sensor Module
    • Display: Single
    • Output: NPN
    • Type: Amplifier
    • Beam source: Red
  • Optical (Fiber) Sensor Module
    • Sensing type: diffuse
    • Sensing distance: 60 mm
    • Head form: standard (M3 Bolt)
    • Hood Diameter: 3 mm
    • Cable length: 2 m
    • Cable type: standard type (-40 to 70 C)
    • Fiber diameter: 0.5, 0.25 x 9 mm coaxial
  • Optical (M18) sensor module
    • Operating voltage: 10-30 VDC
    • Output method: PNP
    • Output current: max 150 mA
    • Current consumption: max 25 mA
    • Sensing distance: 30 cm
    • Sensing direction: horizontal
    • Response time: 2 ms
  • Inductive proximity (M18) sensor module
    • Operating voltage: 10-30 VDC
    • Power ripple: <20% peak to peak
    • Output current: max 150 mA
    • Current consumption: <10 mA
    • Output status: NO
    • Output method: PNP
    • Sensing direction: 5mm
    • Response frequency: 800 Hz
  • Load-Cell Sensor Module
    • Ultra-low deflection
    • Robust strain relief
    • 17-4 PH stainless-steel construction
    • For use in compression
    • Utilizes metal foil strain gauge technology
    • Rated output (RO): 1 mV/V nom (25 lb)
    • 2 mV/V nom (50 lb)
    • Excitation (VDC or VAC) 18 max
    • Bridge resistance 350 Ohm nom
    • Insulation resistance ≥500 M ohm @ 50 VDC
    • Connection #29 AWG, 4 conductor, spiral shielded Teflon cable 10-ft [3 m] long
    • Weight (approximate) 0.7 oz [20 g]
    • Safe overload 150% of RO
    • Material PH stainless-steel
    • Max measuring Range: 50 lb (22kg)
  • Automatic control sensors trainer- (CT - 011)
  • Set of components (main & auxiliary)
  • BEDO Software + USB Cables
  • Hard copy user manual
  • Laboratory PC

Automatic control sensors trainer is an advanced comprehensive system which demonstrates almost any type of sensors the user can come across in automatic control applications. The trainer is equipped with a wide range of sensors’ modules in addition to powering modules. Using safety connecting cables & the provided software, trainees will be able to connect between different modules to perform experiments . BEDO software is capable of recording & displaying the sensors’ readings and measurements on a PC screen.

                                     
  • Automatic control sensors trainer is equipped with a grooved panel for easy fixation of the system modules.
  • The trainer is equipped with different modules including main controller modules, sensors modules and auxiliary modules.
  • Main controller modules included are:
    • Sensor controller module
    • Power Supply & Breadboard module
    • High Ampere power Supply module
    • OP-Amp & comparator Amp module
    • Voltage / current module
    • Breadboard module
    • Input / output module
    • Lamp / buzzer module
  • Sensors modules included are:
    • Hall sensor module
    • Motion detector sensor module
    • Rotary (photogate) sensor module
    • Optical (emitting) sensor module
    • Optical (collecting) sensor module
    • Optical (main) sensor module
    • Optical (fiber) sensor module
    • Optical (M18) sensor module
    • Inductive proximity (M18) sensor module
    • Capacitance proximity (M18) sensor module
    • Load-cell sensor module
  •  Auxiliary modules included are :
    • Working board
    • Heating & cooling module
    • Illumination module
    • Position Slide module
    • Rotary encoder module
    • Air pressure module
  • Additional modules (Optionally supplied)
    • Main Sensors Modules :
      • CDS Sensor module
      • Photo-diode sensor module
      • Photo-transistor sensor module
      • Thermistor (NTC) sensor module
      • Thermistor (PTC) sensor module
      • Thermistor (CTR) sensor module
      • PT temperature sensor module
      • Microphone sensor module
      • PH sensor module
    • Auxiliary Modules:
      •  Tuning fork module
      •  Chemistry experiment stand
  • for some modules , a schematic diagram of the circuit or component is printed on its front panel for better understanding of the system wiring while performing experiments.