S7-1200 PLC Brain System
(CT-024)

1.Power socket and the main trainer ON/OFF switch, 2.Emergency switch, 3.Supply terminals (24,12,5 V) and their GNDs, 4.Power output, 5.PLC module S7-1200 CPU 1214C, 6.Analog simulation terminals (o- 10VDC) & (4-20 mA), 7.Analog simulation knobs, 8.Digital simulation switches, 9.14 digital input terminals, 10.8 analogue input terminals SM 1231, 8 AI Module, Resolution:12 bit+ sign or (13-bit ADC), 11.digital output terminals, 12.analog output terminals SM 1232, 4 AO, +/-10 V, 14-bit resolution, or 0-20 mA/4-20 mA, 13-bit resolution), 13.indication LEDS with terminals, 14.so-Pin D-Sub Socket, 15.25-Pin D-Sub Socket, 16.Simatic S7-1200 analog input, 17.Simatic S7-1200 analog output, 18.Siemens Ethernet switch

  • 1 x SIMATIC S7-1200, CPU 1214C
  • 16 Digital Inputs
  • 16 Digital Outputs
  • 4 Analog Inputs
  • 4 Analog Outputs
  • 2 x Potentiometer for simulation of an Analog 0-10 V signal
  • 2 x Potentiometer for simulation of an Analog 4-20 mA signal
  • S7-1200 brain system (CT-024).
  • Hard copy user manual
  • Laboratory PC.

The S7-1200 brain system offers trainees a broad knowledge about PLC systems starting from the basic fundamentals reaching to advanced applications. Through combining BEDO training modules and the S7-1200 PLC brain system, the trainee will learn about PLC programming and creating different codes for different applications grading in the level of difficulty, allowing trainees to get sufficient knowledge to aid them in the industrial life.

                                     
  • The S7-1200 brain system consists of a power socket to feed the case with power from the laboratory source, emergency switch, supply terminals, a power output to supply power from the main case to the applications modules, a PLC module, analogue simulation terminals and knobs, simulation switches, 16 digital input terminals, 4 analogue input terminals, 16 digital output terminals, 4 analog output terminals, indication LEDS with terminals, 50-Pin D-Sub Socket and 25-Pin D-Sub socket.
  • Analogue simulation terminals and knobs from 0-10 VDC and from 4-20 mA to simulate a DC wave of 0V to 10V or 4mA to 20mA so the trainee can control the voltage or current value using the knob. 
  • The PLC consists of a SIMATIC S7- 1200, CPU 1214C PLC module, digital input and output module, analog input module, analogue output module.
  • The digital I/O module and analog I/O output module have connection pins that are connected internally to their corresponding terminals.
  • The simulation switches are used as digital inputs to the PLC module to enter 1 or 0.
  • Indication LEDS with terminals are included that can be used as outputs.
  • 50-Pin D-Sub socket and 25-Pin D-Sub socket are included to transfer inputs and outputs to the applications module.
  • The S7-1200 brain system is also supplied with power terminals of 24V, 12V and 5V with indication LEDs to indicate power connection to the terminals.
  • The PLC can be connected to an external Laboratory PC where trainees can design, and execute coding examples.
  • Trainees will get familiarized with PLC hardware and software configuration .
  • This brain system can be connected to fundamental training kit or advanced PLC training kit to carry out a wide range of experiments.
  • This brain system can be connected to HMI training kit to display and create graphical user interfaces.