Electrical Measurements Bench
  • Familiarization with basics of electrical configurations.
  • Familiarization with different types of circuit breakers.
  • Conversion from AC to DC current
  • Obtaining of 220 or 380-Volt depending on the connections.
  • Familiarization with earthing.
  • Performing different AC or DC electrical configurations

Three-phase power supply: 230-400 Volt, 16 A, 50 Hz:

  • Key switch for function release.
  • Motor protection switch: 10-16 A.
  • Under-voltage release.
  • Faulty current safety switch: 30 mA.
  • Emergency off button.
  • 5 safety sockets: 4mm for L1, L2, L3, N, PE.
  • 3 phase control lamps for L1, L2, L3.

4 earth contact sockets: 230 v, 16 A

  • Weight: 0.8 Kg

DC constant power supply:

  • Input voltage: 90-264V/ 45-65 Hz
  • Output voltage: 0-15 V
  • Output Current: 0-10 A
  • Output power: 200 W
  • Efficiency: 85%
  • Weight: 2.4 Kg

Adjustable Ac/DC power supply outputs:

  • 0-14 Volt, DC, 12 A
  • 0-27 Volt, DC, 6 A
  • 0-230 Volt, AC, 2 A
  • Electrical Measurements Bench (CW100)
  • Hard copy user manual

The Electrical Measurements Bench is a comprehensive unit that covers the fundamentals of electrical supply, along with essential aspects of protection and maintenance necessary for handling various electrical configurations.

  • Electrical Measurement Bench aims at demonstrating the basics needed for protection and maintenance when dealing with electrical configurations.
  • The educational unit consists of work station bench as well as vertical panel which contains all of the unit components.
  • The educational unit is supplied with different terminals for connecting to perform the needed experiments.
  • The bench top is supplied with circuit breakers as a safety to provide protection against overcurrent and prevent damage of the electrical components.
  • The electrical bench unit is supplied with RCCB in order to provide protection to trainees against electrical power leakage.
  • The unit is supplied with 3-phase over under voltage to break the circuit when applying voltage that’s higher or lower than the intended voltage.
  • The unit is provided with a motor protection module to protect against back current.
  • The educational station is provided with fixed 3-phase output which enables trainees to obtain single phase 220-volt or three phase 380-volt.
  • The 3-phase output module is supplied with three indication LEDs to state the operation of the associated socket.
  • The unit is supplied with four power sockets to connect to any external device aided with earth to provide more protection.
  • The educational station is supplied with adjustable AC/DC power to supply to obtain voltage in the range of 220-380 Volt.
  • Voltage in the AC/DC power supply system can be supplied using a knob.
  • The DC system is supplied with a rectifier to convert the AC current into DC.
  • The unit is supplied with an emergency button in case of any inconvenience as well as main ON/OFF switch.