Computerized Digital Technology Trainer
(D200-01)
  • Studying characteristic of basic logic gates and its possible states.
  • Analysis of digital logic circuits.
  • Extracting boolean expressions of the digital logic circuits
  • Verifying boolean algebra laws and de morgan's theorems
  • Implementation of realistic applications using logic gates
  • Practically demonstrate the equivalent equations
  • Verifying karnaugh map method
  • Analysis and design of combinational circuits.
  • Implementing popular combinational circuits such as adders and subtracters.
  • Discovering the characteristic of decoders, encoders, multiplexers and demultiplexers.
  • Differentiate between combinational and sequential circuits.
  • Experimental the characteristic of the different types of flip-flops.
  • Observe the operation of shift registers and counters.
  • Construct different types of counters
  • Experimental different sequential circuits to use in various applications.
  • Demonstrate digital circuits results using seven-segments module.
  • Computerized digital technology trainer (D200-01)
  • Hard copy user manual
  • Digital multimeter
  • Oscilloscope

The computerized digital technology trainer is an ideal tool for learning the basics of digital logic circuits, properties & parameters of digital circuits. All function groups required for conducting experiments in digital technology are integrated in the digital board and supplied with power by a built-in power supply unit. The supply unit are equipped with overload protection for safety purpose. The training system is a platform equipped pulse generator as well as various digital I/O components. Students are able to use these components to prototype the digital circuits on the training board.

                                     
  • The digital trainer system powered using a power cable to be connected to the main supply of the building with 220 VAC/50HZ
  • The trainer comes with a stabilized built-in power supply that distributes 5 volts to every component of the trainer.
  • containment of Pulse generator with Fixed amplitude of 5V p-p (0 to 5V) and Variable frequency range that starts from 1 Hz up to 20 KHz that is compatible with all the digital gates and blocks in the training system.
  • Subsequent Frequency divider with 4 different dividing factors.
  • The Digital kit contains 66 logic gates, 19 Combinational and Sequential blocks, 2 seven segments displays, Pull-up/down Resistors Block, 8 indication LEDs and Buttons Set.
  • Each block and terminal on the card are labeled for easy recognition to assure more accurate and safe wiring during experimentation.
  • Possible to check Output signal and apply Input signal through PC by using of USB connection.
  • Items
    • Basic logic gates: 66 gates
    • Jk flip-flops: 8
    • D flip-flops: 4
    • Binary adder: 1
    • 4- bit binary Counter: 1
    • 8 to 1 multiplexer: 1
    • Bi-directional shift register: 1
    • BCD counter :1
    • 8-bit Pull-up/down Resistors Block: 1
    • 8-bit indication LEDs:1
    • seven segments display with build in seven segments decoder: 2
    • Switches and buttons set: 1
  • Additional modules:
    • 8-bit LED module
    • Toggle Switch module - contains 12 switch
    • 4-bit adder Module
    • 4-bit comparator Module (x 2)
    • 8x3 Encoder Module
    • 3x8 demultiplexer Module
    • 4x16 decoder Module (x 2)
    • Bread Board Module