Doorbell & Intercom Training Kit
(EL - 008)
  • Door opener system for two flats in a building
  • Internal call between two users with same apartment
  • Door bell system (including remote location)
  • • Staircase lighting using latching relay
  • • Autonomous lighting of building entrance and staircase lighting with override mode
  • Door Bell
    • 5 programmable melodies
    • Normally open
  • PIR Detector
    • Operating voltage: 220 VAC
  • Power supply
    • AC voltage rated at 220V
    • DC voltage rated at 6V.
  • Doorbell & Intercom Training Kit (EL - 008)
  • Hard copy of the user manual
  • Electrical installations training frame (EL - 301)

This kit contains multiple modules in order to interpret and carryout audio intercom system. With combing with the electrical installations frame and mixing and matching various modules, the trainee will be able to perform wide range of experiments and investigate the creation of audio intercom systems.

                                     
  • The training kit consists of up to 11 modules which can be mixed and matched to carryout various audio intercom experiments. 
  • All of the modules contain power supply terminals and earthing terminals to receive power from the main frame.
  • Using this kit, trainees will acquire knowledge regarding electrical wiring and audio intercom circuit designing and forming.
  • The kit contains audio entrance module which is essential in initiating audio calls with the internal units.
  • Audio intercom module is supplied to the system in which trainees can receive a call from the door station.
  • The kit also includes audio interphones module which allows residents to call each other from room to room.
  • A door bell module containing bell pushbutton with lamp and electronic bell. The bell push button triggers the electronic bell through sending an AC voltage signal.
  • Door lock system can also be interpreted within this system through using the provided door lock module.
  • Staircase lighting can be also controlled through the provided impulse relay. when the relay is triggered (pulse received) it maintains the state of the contacts until a second signal is received to return to original state.
  • Indicator lamp module is provided which serves as simulation for staircase light, four indication lamps are included in this module.
  • PIR (motion) sensor module is included where it can be used in experiments such as staircase lighting by sensing motion without the need to switch it on or off.
  • Four pushbuttons are included in one module which can serve as stairway pushbutton, these pushbuttons are normally open by default.
  • Timer module is included which can be used to control the time of staircase lighting.
  • A power supply of 6 V is supplied to power up the interphones within an apartment.
  • The modules are well protected in a provided kit to protect against wear and deterioration.