Multi-Channels Communication Training system
(EM - 002)
  • Multi-Channels Communication Training system (EM - 002)
  • 3 X USB Cable
  • 2 X Ethernet Cable
  • 3 X DB9 cable
  • 2 X Fiber Optics Cable
  • 2 X Oscilloscope Cables
  • 1 X NFC Card
  • 1 X USB Memory SD Card
  • Hard copy user manual

The Multi-Channels Communication Training Kit introduce multiple data transmission between one Master module ( Server ) and one or more Slave Modules ( Client ) by using up to 14 different communication protocols ( 7 Wired Communication modules, 7 Wireless communication modules ).Based on plug-in modules that make it easy to do the experiments in an easy way. Test points have been provided at interesting points to make the trainee able to observe the signals across the system.

                                     
  • Learn the trainee the different types of communication protocols through 14 different communication protocol between wired and wireless communication in a master-slave ( Server-client ) topology
  • Learn the trainee this types of Wired communication modules ( RS232 ,RS485 ,RS422 ,Ethernet, CAN, USB, Optical )
  • Learn the trainee this types of Wireless communication modules (Wi-Fi, IrDA, Bluetooth and Bluetooth Audio , RF433, LoRa, ZigBee, NFC )
  • Learn the trainee the Data Packets Observation by the included oscilloscope
  • Learn the trainee interfacing with the Included input/output devices to establish a wide range of experiments through the different communication Modules
  • Software Specifications:
    • Main Controller Monitoring Dashboard ( Master and Slave)
      • RS232 Data Block
      • RS485 Data Block
      • RS422 Data Block
      • Ethernet Data Block
      • USB Data Block
      • CAN Data Block
      • Optical Data Block
      • IrDA Data Block
      • Wi-Fi Data Block
      • RF433 Data Block
      • Bluetooth Data Block
      • LoRa Data Block
      • Zig-bee Data Block
      • NFC Data Block
    • PC Oscilloscope Software
      • Measurement of Frequency parameters ,Voltage parameters Triggering and Cursor ability
      • Data blocks Analysis
  • Hardware Specifications:
    • Wired Communication Modules:
      • RS232 Communication
        • 2 X RS232 Modules
        • Baud rate up to 115200 bit per second
        • DB9 socket as the Interface
        • Synchronous and Asynchronous
        • Half duplex
        • Single ended
      • RS485 Communication
        • 1 X RS485 Module (act as a master )
        • 2 X RS485 Modules (act as a slaves )
        • RJ45 as the interface
        • Half duplex
        • Differential Transmitter/receiver
        • Baud rate up to 115200 bit per second
      • RS422 Communication
        • 1 X RS422 Module (act as a master )
        • 2 X RS422 Modules (act as a slaves )
        • RJ45 as the interface
        • Half duplex
        • Differential Transmitter/receiver
        • Baud rate up to 115200 bit per second
      • Ethernet Communication
        • 2 X Ethernet Modules
        • RJ45 as the interface
        • Gigabit Ethernet ( up to 1 Gbps )
      • CAN Communication
        • 1 X CAN Module (act as a master )
        • 2 X CAN Modules (act as a slaves )
        • RJ45 as the interface
        • Differential Transmitter/receiver
        • Baud rate up to 1M bit per second
        • ISO 11898 standard
      • USB Communication
        • 2 X UART To USB Modules
        • USB2.0 as the interface
        • Baud rate up to 12M bit per second
        • Driver Supported Windows 7,10 and Linux
      • Optical Communication
        • 2 X Fiber Optics Modules
        • Wavelength: 650nm
        • optical SMA connector as the interface
        • Optical Power: -6.2dBm
        • Baud rate up to 16M bit per second
    • Wireless Communication Modules:
      • Wi-Fi Communication
        • 2 X Wi-Fi Modules
        • Internal Antenna
        • TCP/IP as the used protocol
        • Modes of operation : STA, SoftAP, STA & SoftAP
      • IrDA Communication
        • 2 X IrDA Modules
        • IrDA SIR communication up to 115200 bps
        • Interfaces with IrDA Compliant Transceivers
        • Supports with IrDA physical Layer Specification (version 1.3)
      • Bluetooth Communication
        • 2 X Bluetooth Modules
        • RF Transceiver
        • Bluetooth Specification v2.0+EDR
        • 2.4GHz ISM band
        • GFSK Modulation
        • Asynchronous Speed up to 2.1Mbps / 160 kbps,
        • Synchronous Speed up to 1Mbps/1Mbps
      • Bluetooth Audio Communication
        • 2 X Bluetooth Audio Modules
        • 2.4Ghz Frequency
        • Internal Antenna
        • Up to 3Mbps Data Rate
        • Pre-amp output to headphones or 3W Speaker directly
        • MP3, WMA, WAV Audio
      • RF433 Communication
        • 1 X RF433 Modules Transmitter
        • 1 X RF433 Modules Receiver
        • 433 MHz Frequency
        • Internal Antenna
        • Up to 4800 bps Data Rate
      • LoRa Communication
        • 2 X LoRa Modules
        • Supplied By Battery or Kit’s Supply
        • 137 MHz to 525 MHz Frequency Range
        • FSK, GFSK, GMSK, MSK, LoRa, OOK Modulation
        • Up to 300 Kbps Data Rate
        • integrated synthesizer with a resolution of 61Hz
        • including temperature sensor
        • including battery indicator
        • including bit synchronizer for clock recovery
      • ZigBee Communication
        • 2 X ZigBee Modules
        • Supplied By Battery or Kit’s Supply
        • IEEE 802.15.4 Zigbee protocol
        • DSSS Modulation
        • 128-bit AES encryption
        • 2405~2480MHz Frequency Range
      • NFC Communication
        • 1 X NFC Module And Card
        • Up To 115200 bps BaudRate
        • 13.56 MHz Frequency
        • Reader / Writer Mode ISO/IEC 14443A, ISO/IEC 14443B, MIFARE, FeliCa
        • Card Emulation Mode: ISO 14443A/MIFARE Classic 1K or 4K, FeliCa
        • Peer-to-Peer: ISO/IEC18092, ECM340
    • Main Kit Modules :
      • Sensors Modules
        • 1 X Light Sensor Plug in Module ( Interface : Analog And Digital )
        • 1 XHumidity / Temperature Sensor Plug in Module ( Interface : I2C)
        • 1 XPSD Sensor Plug in Module ( Interface : Digital )
      • Display Modules
        • 1 X Text LCD 2X16 Plug in Module ( Interface : I2C )
        • 1 x Dot Matrix 8X8 Plug in Module ( Interface : SPI )
        • 1 x RGB LED Plug in Module ( Interface : Digital )
        • 1 x FND Plug in Module ( 7-segment 4 Digits) ( Interface : I2C)
      • Output Modules
        • Piezo Buzzer Plug in Module ( Interface : Digital )
        • Servo Motor Plug in Module ( Interface : PWM )
      • PC Oscilloscope
        • 2 Channel Oscilloscope
        • AC/DC Coupling
        • 200 MS/s Sampling Rate
        • 25 MHz Bandwidth
        • 16 kS Memory depth
        • Spectrum analyzer (DC to 25 MHz), math channels
        • Measurement of Frequency parameters ,Voltage parameters
        • Triggering and Cursor ability
        • USB2.0 Interface