PIC Microcontroller Trainer
(EM - 002)
  • PIC microcontroller trainer - (RM - 002) Main Kit (RM-002.1)
    • Type A Communication kit (RM-002.1.1)
    • Type A Actuator Kit (RM-002.1.2)
    • Type A Sensors Kit (RM-002.1.3)
    • Type-B Plug-in Modules (RM-002.1.4)
  • Programming software
  • Sample codes
  • USB cable A to B 1.5 m
  • RS232 cable 1.5 m
  • Hard copy user manual
  • Laboratory PC

PIC Micro controller kit is a benchtop kit that tends to familiarize the trainee with the different microcontroller components and connections. The kit is designed in the form of a lightweight portable Plastic case equipped with a real microcontroller and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on Microchip PIC Microcontroller .Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . With the PICkit In-Circuit Debugger/Programmer, just what you need is a USB cable to PC, no more additional hardware components to apply programming codes . Easy to use and friendly kit

                                     
  • PIC Microcontroller trainer consist of
    • Embedded PICKIT programmer / debugger (access via USB port with indication LEDs)
    • Microcontrollers supported as individual modules that plugged in to the Kit ( default Plug-in module with kit «PIC18f45k22 SMD Module )
    • The trainer is also support these families of microcontroller (not included, refer to optional section) PIC18F Family (PIC10F, PIC12F, PIC16F, PIC16F Enh, PIC18F, PIC18FJ and PIC18FK)
    • The trainer also Supported these families of microcontroller packages (not included , refer to optional section) (DIP40, DIP28, DIP20, DIP18, DIP14, DIP8 and SMD) Through MC Plug-in modules
    • Microcontroller working voltage selectable (+3.3 or +5V)
    • Integrated fixed DC power supply module: + 3.3V, +5V, +12V, -5V, -12V (Fuse Protected) with led indicators - accessed via 2mm sockets (for external modules)
    • Integrated variable DC power supply Module : +1.25VDC to +5VDC or -1.25VDC to -5VDC (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
    • Pullup and pulldown resistor for every microcontroller Pin (selectable between (pull-up, floating, pull-down)
    • Indication LED for every microcontroller Pin
    • Pushbutton for every microcontroller pin (selectable between VCC or GND signal)
    • Pin header male/female groups for every microcontroller PORT for external connections
    • Programming IDE: supports MPLAB® X integrated development environment and MikroC for PIC
    • Includes ready to run codes for all included trainer components by MicroC For PIC
    • 8 Digital switches (+3.3 or +5V) Selectable
    • Integrated pulse generator from 2 Hz : 1KHz ( level selectable +3.3V or +5V) 
    • Dip switches for configuring microcontroller I/O Ports
    • 1 x AC power source socket (fuse protected) with ON/OFF switch
  • Main Kit Code : (RM-002.1)
    • Type A Communication Kit Code : (RM-002.1.1)
      • 1 x (2 x 16 LCD module) contrast adjustable via potentiometer
      • 1 x (64 X 128 GLCD module) contrast adjustable via potentiometer
      • 1 X UART To USB Interface Type-A Plug-in Module
      • 1 x I2C EEPROM type-A plug-in module
      • 1 X RS232 Interface Type-A Plug-in Module
    • Type A Actuator Kit Code : (RM-002.1.2)
      • 1 x Piezo buzzer type-A plug-in module
      • 1 x speaker type-A plug-in module
      • 1 X seven segment type-A plug-in module
      • 1 x stepper motor interface Through ULN23803
      • 1 x DC motor interface
      • 1 x servo motor interface
    • Type A Sensors kit Code : (RM-002.1.3)
      • 1 x temperature sensor LM35 type-A plug-in module
      • 1 x temperature sensor D518B20 type-A plug-in module
      • 2 x potentiometers to Simulate analog I/P To microcontroller (microcontroller connected pin selectable)
      • 5 X Type-A Plug-in Modules Holder ( For Type-A Plug-in Modules )
    • Type-B Plug-in Modules Code : (RM-002.1.4)
      • 1 X Type-B Plug-in Modules Holder ( For Type-B Plug-in Modules )
      • 1 x USB socket type B (for direct USB connection as a host)
  • PIC10F
  • PIC12F
  • PIC16F
  • PIC16F Enh
  • PIC18F
  • PIC18FJ
  • PIC18FK
  • DIP40
  • DIP28
  • DIP20
  • DIP18
  • DIP14
  • DIP8
  • SMD
  • WIFI
    • Signal Type : UART
    • Signal Level :5V or 3.3V
    • SMD
  • Audio In & Out
    • Signal Type : SPI
    • Signal Level : 3.3V
  • SD Card
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Ethernet
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Bluetooth Module
    • Signal Type : UART
    • Signal Level :5V
  • RF Transceiver
    • Signal Type : SPI
    • Signal Level :5V
  • UART To RS-232
    • Signal Type : UART
    • Signal Level :5V or 3.3V Selectable
  • Serial EEPROM
    • Signal Type : I2C
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • Relay
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • RGB LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Limit Switch
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Push Button
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Laser
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • 8x8 LED Matrix
    • Signal Type : SPI
    • signal level : 5V or 3.3V
  • Light Sensor (CDS Photoresistor)
    • Signal Type : Analog and Digital
    • Signal Level :5V or 3.3V Selectable
  • Tilt Sensor
    • Signal Type : Digital- Signal
    • Level : 5V or 3.3V Selectable
  • Mercury Sensor (Switch):
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Reed Sensor (Switch)
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Flame Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Touch sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Opto Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Knock Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Thermistor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • Humidity And Temperature sensor (DHT11)
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • Vibration Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Water Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • DS18B20 Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Barometer Sensor
    • Humidity, barometric pressure and ambient temperature BME280
    • Signal Type : I2C
    • Signal Level : 3.3V
  • IR Reflective
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • IR Receiver
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • LM35
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Sound Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • GY-87 Sensor
    • 3-axis Gyroscope + 3-axis acceleration + 3-axis magnetic field + air pressure
    • Signal Type : I2C
    • Signal Level : 5V or 3.3V
  • Ultrasonic Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • PIR Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Keypad 3 X 4
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • 7 Segment
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V