Multi-Controller Trainer kit
(EM - 008)
  • Multi-Controller Trainer kit (EM - 008)
    • Main Kit (EM - 008.1)
      • Type A Communication Kit (EM - 008.1.1)
      • Type A Actuator Kit (EM - 008.1.2)
      • Type A Sensors kit (EM - 008.1.3)
      • Type-B Plug-in Modules (EM - 008.1.4)
        • USB cable A to B 1.5 m
        • RS232 cable 1.5 m
  •    Hard copy user manual
  • Laboratory PC
  • Additional Kits (EM-008.2)
  • Additional Type A Communication Kit(EM-008.2.1)
  • Additional Type A Actuators Kit(EM-008.2.2)
  • Additional Type A Sensors Kit (EM-008.2.3)
  • Additional type-B Plug-in Modules(EM-008.2.4)

 

Multi-Controller kit is a benchtop kit that tends to familiarize the trainee with different Microcontrollers ,related components and connections. The kit is designed in the form of a lightweight portable Plastic case equipped with a real microcontrollers and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on Multi-Controllers Topology with a big advantages of no requirement for hand made jumper wires connections between system components to establish the experiment. The Multi-Controller kit is based totally on the concept of plug-in, all microcontrollers modules , peripheral modules are pluggable which minimize the experiment time and provide safety to the system modules. Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . CPLD module is added to give the gain of knowledge about Configurable digital logic design. With the In-Circuit Debugger/Programmer, just what you need is a USB cable to Laboratory PC, no more additional hardware components to apply programming codes .
Easy to use and friendly kit.

                                     
  • Multi-Controller kit consist of
    • PIC Microcontroller Plug-in Module : PIC18F45K22
    • AVR Microcontroller Plug-in Module : ATMega128
    • 8051 Microcontroller Plug-in Module: AT89S52
    • CPLD Plug-in Module : Xilinx XCR3256XL (Support for complex asynchronous clocking)
    • In-Circuit Debugger/Programmer For the supported Microcontroller Modules
  • Microcontroller working voltage selectable (+3.3 or +5V)
  • Integrated fixed DC power supply module:+3.3V, +5V, +12V, -5V, -12V (Fuse Protected) with led indicators - accessed via 2mm sockets (for external modules)
  • Integrated variable DC power supply Module : +1.25VDC to +5VDC or -1.25VDC to -5VDC (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
  • Pullup and pulldown resistor for every microcontroller Pin (selectable between (pull-up, floating, pull-down)
  • Indication LED for every microcontroller Pin
  • Push Button for every microcontroller pin (selectable between VCC or GND signal)
  • Pin header male/female groups for every microcontroller PORT for external Connections
  • Programming IDE:
    • supports MPLAB® X integrated development environment and MikroC for PIC
    • supports atmel studio 7 development environment, atmel start online tool and Mikroc For AVR
    • supports keil for 8051
    • supports ISE WebPACK for CPLD
  • Includes ready to run codes for all included trainer components
  • 8 Digital switches (+3.3 or +5V) Selectable
  • Integrated pulse generator from 2 Hz : 1KHz ( level selectable +3.3V or +5V)
  • Dip switches for configuring microcontroller I/O Ports.
  • AC power source socket (fuse protected) with ON/OFF switch.
  • Type A Communiction Kit (EM-008.1.1)
    • 1 x (2 x 16 LCD module) contrast adjustable via potentiometer
    • 1 x (64 X 128 GLCD module) contrast adjustable via potentiometer
    • 1 X UART To USB Interface Type-A Plug-in Module
    • 1 x I2C EEPROM type-A plug-in module
    • 1 X RS232 Interface Type-A Plug-in Module
  • Type A ACtuator KIt (EM-008.1.2)
    • 1 x Piezo buzzer type-A plug-in module
    • 1 x speaker type-A plug-in module
    • 1 X seven segment type-A plug-in module
    • 1 x stepper motor interface Through ULN23803
    • 1 x DC motor interface
    • 1 x servo motor interface
  • Type A Sensors kit (EM-008.1.3)
    • 1 x temperature sensor LM35 type-A plugin module
    • 1 x temperature sensor D518B20 type-A plug-in module
    • 2 x potentiometers to Simulate analog I/P To microcontroller (microcontroller
    • connected pin selectable)
    • 5 X Type-A Plug-in Modules Holder ( For Type-A Plug-in Modules )
  • Type-B Plug-in Modules (EM-008.1.4)
    • 1 X Type-B Plug-in Modules Holder ( For Type-B Plug-in Modules )
    • 1 x USB socket type B (for direct USB connection as a host)
  • Additional Type A Communication Kit (EM-008.2.1)
    • WIFI   Technial Data :
      • Signal Type : UART
      • Signal Level :5V or 3.3V
      • SMD
    • Audio In & Out  Technial Data :
      • Signal Type : SPI
      • Signal Level : 3.3V
    • SD Card Technial Data :
      • Signal Type : SPI
      • Signal Level :5V or 3.3V
    • Ethernet  Technial Data :
      • Signal Type : SPI
      • Signal Level :5V or 3.3V
    • Bluetooth Module  Technial Data :
      • Signal Type : UART
      • Signal Level :5V
    • RF Transceiver  Technial Data :
      • Signal Type : SPI
      • Signal Level :5V
    • UART To RS-232 Technial Data :
      • Signal Type : UART
      • Signal Level :5V or 3.3V Selectable
    • Serial EEPROM Technial Data :
      • Signal Type : I2C
      • Signal Level :5V or 3.3V Selectable
      • Address Configurable
  • Additional Type A Actuators Kit (EM-008.2.2)
    • Relay  Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V
    • LED  Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V Selectable
      • Address Configurable
    • RGB LEDbn Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V Selectable
    • Limit Switch Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V Selectable
    • Push Button Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V Selectable
    • Laser Technial Data :
      • Signal Type : Digital
      • Signal Level :5V or 3.3V
    • 8x8 LED Matrix Technial Data :
      • Signal Type : SPI
      • signal level : 5V or 3.3V
  • Additional Type A Sensors Kit (EM-008.2.3)
    • Light Sensor (CDS Photoresistor) Technial Data :
      • Signal Type : Analog and Digital
      • Signal Level :5V or 3.3V Selectable
    • Tilt Sensor : Technial Data :
      • Signal Type : Digital- Signal
      • Level : 5V or 3.3V Selectable
    • Mercury Sensor (Switch): Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Reed Sensor (Switch) Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Flame Sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Touch sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Opto Sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Knock Sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • TheEMistor Technial Data :
      • Signal Type : Analog and Digital
      • Signal Level : 5V or 3.3V Selectable
    • Humidity And Temperature sensor (DHT11) Technial Data :
      • Signal Type : DigitalI
      • Signal Level :5V or 3.3V
    • Vibration Sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Water Sensor Technial Data :
      • Signal Type : Analog and Digital
      • Signal Level : 5V or 3.3V Selectable
    • DS18B20 Sensor Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
    • Humidity, barometric pressure and ambient temperature BME280 Technial Data :
      • Signal Type : I2C
      • Signal Level : 3.3V
    • IR Reflective Technial Data :
      • Signal Type : Analog and Digital
      • Signal Level : 5V or 3.3V Selectable
    • IR Receiver Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V
    • LM35 Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V
    • Sound Sensor Technial Data :
      • Signal Type : Analog and Digital
      • Signal Level : 5V or 3.3V Selectable
      • GY-87 Sensor
      • 3-axis Gyroscope + 3-axis
      • acceleration + 3-axis magnetic
    • field + air pressure Technial Data :
      • Signal Type : I2C
      • Signal Level : 5V or 3.3V
    • Ultrasonic Sensor Technial Dta :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V Selectable
      • PIR Sensor Technial Data :
        • Signal Type : Digital
        • Signal Level : 5V or 3.3V
  • Additional type-B Plug-in Modules Code :(EM-008.2.4)
    • Keybad 3 X 4  Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V
    • 7 Segment Technial Data :
      • Signal Type : Digital
      • Signal Level : 5V or 3.3V