We Make The Difference
Arduino Trainer
(EMB103)
  • Arduino trainer - (EMB103)
  • Programming software
  • Sample codes
  • USB cable A to B 1.5 m
  • Hard copy user manual
  • Laboratory PC

Arduino kit (EMB103) is a benchtop kit that tends to familiarize the trainee with the different microcontroller components and connections. The kit is designed in the form of a lightweight portable aluminum case equipped with a real Arduino board and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on Arduino Mega2560 . Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . The kit is easy to use and friendly kit.

  • Arduino trainer consist of
    • 1 x Arduino Mega2560 board
    • 1 x Camera 640x480
    • 1 x Temperature sensor
    • 1 x Vibration sensor
    • 1 x Remote + IR receiver
    • 1 x Color sensor
    • 1 x PIR motion detector
    • 1 x Ultrasonic sensor
    • 1 x 3-axis Gyro + 3-axis acceleration
      + 3-axis magnetic field + air pressure sensor
    • 1 x Joystick
    • 1 x SD card module
    • 1 x NFC module
    • 2 x RF transceiver
    • 1 x LAN module
    • 1 x “8x8 LED matrix”
    • 1 x Key bad
    • 1 x Serial EEPROM
    • 1 x WIFI module
    • 1 x DC motor interface
    • 1 x Servo motor interface
    • 1 x Stepper mtor interface
    • 1 x Bread board
    • 1 x Relay module
  • Integrated fixed DC power supply module:
    + 3.3V, +5V, +12V, -5V, -12V (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
  • Integrated variable DC power supply module: 0 to +3.3V or +5V,0 to -3.3V or 5V (fuse protected) with led indicators -accessed via 2mm sockets (for external modules)
  • 8 Digital O/P switches
  • Integrated pulse generator from 10 Hz: 10KHz (3 ranges)
  • 4 x Seven segment modules
  • 1 x (2 x 16 LCD module) contrast adjustable via potentiometer
  • 1 x Piezo buzzer module
  • 1 x Speaker
  • 2 x Potentiometers to simulate analog I/P to srduino
  • 1 x BNC socket (configured to get a direct connection to any pin)
  • 1 x AC power source socket (fuse protected) With ON/OFF switch
  • Pullup and pulldown resistor for digital Pins (delectable between (pull-up, floating, Pull-down)
  • Indication LED for every Pin
  • Pin header male/female groups for external connections
  • Includes ready to run codes for all included trainer components