Raspberry Pi Trainer
(EMB104)
  • Raspberry Pi trainer (EMB104)
  • Hard copy user manual
  • Pre-installed Raspberry Pi OS With Sample Codes on 32GB Memory Card
  • HDMI Cable
  • Laboratory PC

Raspberry Pi kit is a benchtop kit That tends to familiarize the trainee with learning electronics, programming, and basic computer science. The kit is designed in the form of a lightweight portable Plastic case equipped with a real Raspberry Pi and various electronic components related to its functions to allow wide ranges of experiments. it is based on Raspberry Pi 4B .Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . The kit is easy to use and friendly kit.

Raspberry Pi trainer consist of:

  • 1 x Raspberry Pi 4B – 4GB or 8GB ( Specify on order ) module with
    • Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
    • 4GB or 8GB ( Specify on order ) LPDDR4-3200 SDRAM
    • 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, bluetooth 5.0, BLE
    • Gigabit ethernet
    • 2 USB 3.0 ports; 2 USB 2.0 ports.
    • Raspberry Pi standard 40 pin GPIO header
    • 2 × micro-HDMI ports (up to 4kp60 supported)
      » 2-lane MIPI DSI display port
    • 2-lane MIPI CSI camera port
  • 4-pole stereo audio and composite video port
  • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
    • OpenGL ES 3.0 graphics
    • Micro-SD card slot for loading operating system and data storage
    • Micro SD 32GB Loaded with raspbian OS for Raspberry PI
  • 1 x 8-megapixel camera capable of taking photographs of 3280×2464 pixels capture video at 1080p30, 720p60 and 640x480p90 resolutions
  • 1x 7Inch LCD capacitive touch screen HDMI for Raspberry Pi 800*480
  • 1x Mini-vibration motor
  • 1x “14x12 RGB LED matrix”
  • Sensor GY-87
    •  1 x ( 3-axis Gyroscope + 3-axis acceleration + 3-axis magnetic field + air pressure )
  • Type-A plug-in module
    • 1x Temperature & humidity sensor DHT11 type-A plug-in module
    • 1X Humidity, barometric pressure and ambient temperature BME280 Type-A Plug-in Module
    • 1x Light sensor ( CDS photoresistor ) type-A plug-in module
    • 1x PIR motion sensor type-A plug-in module
    • 1x Ultrasonic sensor type-A plug-in module
    • 1x DC motor interface
    • 1x Servo motor interface
    • 1x Stepper motor through ULN2803
    • 1x Remote + IR receiver type-A plug-in Module
    • 1x RFID module
    • 1x Relay type-A Plug-in Module
    • Integrated fixed DC power supply module:
      + 3.3V, +5V, +12V, -5V, -12V (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
    • Integrated variable DC power supply module: +1.25VDC to +5VDC or -1.25VDC to
      - 5VDC (fuse protected) with led indicators
      - accessed via 2mm sockets (for external modules)
    • Integrated pulse generator from 2 Hz : 1KHz
    • 1x Seven Segment Type-A Plug-in Module
    • 1x (2 x 16 LCD module) contrast adjustable via potentiometer
    • 1x Piezo buzzer Type-A Plug-in Module
    • 1x Speaker Type-A Plug-in Module
    • 2x Potentiometers to simulate analog I/P to Raspberry Pi with A/D converter
    • 5x Type-A Plug-in Modules Holder (for type-A plug-in modules)
    • 1x AC power source socket (fuse protected) with ON/OFF switch
    • Pull up and pull down resistor for every GPIO Pin (selectable between (pull-up, floating, pull-down)
    • Indication LED for every GPIO Pin
    • Pin header male/female group for GPIO for external connections
    • Includes ready to run codes for all included trainer components