Microcontroller kit (EMB105) is a benchtop kit that tends to familiarize the trainee with the different microcontroller components and connections. The kit is designed in the form of a lightweight portable Plastic case equipped with a real microcontroller and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on STM32 ARM Microcontroller (STM32 ARM Cortex-M3 and Cortex-M4, M7, M0 devices) STM32F407 Microcontroller Included as the main microcontroller. Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . With the In-Circuit Debugger/Programmer, just what you need is a USB cable to PC, no more additional hardware components to apply programming codes . Easy to use and friendly kit.
- STM32 ARM microcontroller trainer consist of
- Embedded ST-Link programmer / debugger (Access via USB port with indication LEDs)
- Microcontrollers supported as individual modules that plugged in to the Kit ( default Plug-in module with kit «STM32F407 SMD Module ).
- The trainer is also support these families of microcontroller STM32 ARM Cortex-M0 (STM32F103C8), STM32 ARM Cortex-M7 (STM32F7), Devices
- Integrated fixed DC power supply module: + 3.3V, +5V, +12V, -5V, -12V (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
- Integrated variable DC power supply module: +1.25VDC to +5VDC or -1.25VDC to -5VDC (fuse protected) with led indicators - Accessed via 2mm sockets (for external modules)
- 8 digital switches
- Integrated pulse generator From 10 Hz: 2 Hz : 1KHz
- Pullup and pulldown resistor for every microcontroller pin (selectable between (Pull-up, floating, Pull-down)
- Indication LED for every microcontroller pin
- Pushbutton for every microcontroller Pin (selectable between VCC or GND signal)
- Dip switches for configuring microcontroller I/O Ports
- Pin header male/female groups for every microcontroller PORT for external connections
- Programming IDE: supports STM32CubeIDE integrated development environment and mikroC for ARM
- Includes ready to run codes for all included trainer components with stm32cube ide
- 1 x AC power source socket (fuse protected) With ON/OFF switch
- Main Kit Code : (EMB105.1) Type A Communication Kit
- 1 X UART To USB Interface Type-A Plug-in Module
- 1 X RS232 Interface Type-A Plug-in Module
- 1 x Ethernet Type-A Plug-in Module allows you to develop Ethernet applications.
- 1 x Audio Type-A Plug-in Module
- 1 x MicroSD Card Type-A Plug-in Module
- 1 x TFT touch screen enables you to develop multimedia applications
- 1 x (2 x 16 LCD Module) contrast adjustable Via Potentiometer
- 1 x (64 X 128 GLCD module) contrast adjustable Via potentiometer
- 1 x I2C EEPROM type-A plug-in module
- Type A Actuator Kit Code : (EMB105.1.2)
- 1 X Seven Segment Type-A Plug-in Module
- 1 x piezo buzzer type-A plug-in module
- 1 X speaker type-A plug-in module
- 1 x type-A plug-in module
- 1 x stepper motor interface Through ULN2803
- Type A Sensors Kit Code : (EMB105.1.3)
- 2 x potentiometers to simulate analog I/P to microcontroller
- 5 X Type-A Plug-in Modules Holder ( For Type-A Plug-in Modules )
- Type-B Plug-in Modules Code : (EMB105.1.4)
- 1 X Type-B Plug-in Modules Holder ( For Type-B Plug-in Modules )
- 1 x USB socket type B (for programming/debugging) with status LEDs
- 1 x USB socket type B (for direct USB connection)