We Make The Difference
Petrol/Natural Gas Engine Trainer
(ENG100)
  • Familiarization with petrol/natural gas engine structure and operation.
  • Familiarization with extra components and setup needed to add natural gas as an additional source fuel to a petrol engine car.
  • Gaining skills in troubleshooting petrol/natural gas engine system faults.
  • Learning about the function of each system in the petrol/natural gas engine cars.
  • Learning about the type and function of each sensor in petrol/natural gas engines car.
  • Testing the behavior of each component in the system under normal and faulty condition and comparing between the readings in both cases using external multimeter or oscilloscope.
  • After understanding the system , the trainee will be ready to study its common malfunctions using below listed faults insertion switches:
    • F1 : Cooling fan fault
    • F2 : Cam sensor fault
    • F3 : Crank sensor fault
    • F4 : Crank sensor fault
    • F5 : Oxygen sensor fault
    • F6 : Oxygen sensor heater fault
    • F7 : Map sensor fault
    • F8 : Map sensor fault
    • F9 : Knock sensor fault
    • F10 : Knock sensor fault
    • F11 : ECT sensor fault
    • F12 : Fault in ignition coil
    • F13 : Fault in ignition coil
    • F14 : Fault in injector no.1
    • F15 : Fault in the injector no.2
    • F16 : Fault in the injector no.3
    • F17 : Fault in the injector no.4
    • F18 : Fuel pump fault
    • F19 : Fuel level fault
    • F20 : Fault in ignition switch
  • Battery 65 A/H.
  • Fuel tank 30 liters.
  • Cooling fan 12 volts.
  • Petrol engine 1500 cc
  • Petrol/natural gas engine trainer (ENG100)
    • Natural gas cylinder and regulator
  • Hard copy user manual
  • Bedo troubleshooting software
    • Required for operation : PC
  • Refurbished engine 2000 CC
  • Brand new engine 1500 CC
  • Brand new engine 2000 CC
  • Transmission pressure solenoid valves measuring points module
  • Multi-meter
  • Oscilloscope
  • Fault diagnosis device
  • Digital content (BI01)

Petrol/natural gas engine trainer (ENG100) features a real operational electronic injection petrol/natural engine complete with all supplementary systems necessary for its operation including electric system, injection system , ignition system , cooling system , intake & exhaust system and etc. The trainer helps in demonstration petrol/natural gas engine structure, operation and test its performance under normal and faulty conditions, it also introduces the the trainee to the concept of using natural gas as an alternative source of fuel in the car. Additionally, the unit is provided with faults insertion switches to simulate 20 most common faults of petrol/natural gas engine vehicles and enhance trainees faults finding skills.

  • The educational unit features a 4-cylinder petrol/natural gas engine mounted inside a robust chassis.
  • The special design of the trainer chassis allows accomodating all petrol engine car systems, it also allow observing all these systems clearly during operation while ensuring trainees safety at the same time.
  • The unit includes all systems required for petrol/natural gas engine operation such as:
    • Battery
    • Electric circuitry
    • Fuel reservoir (petrol & natural gas)
    • ECU (electronic control unit)
    • Fuel injection system (petrol & natural gas)
    • Ignition system
    • Cooling system
    • Intake & exhaust system
    • Starter motor and alternator
    • FWD automatic transmission system
  • The trainer is supplied with FWD automatic transmission system by defualt.
  • The unit comes by default with 1500 CC petrol engine.
  • The trainer is supplied with natural gas cylinder and regulator assembly mounted on a separate movable frame.
  • The trainer has a large control panel serves as an easy interface between the car systems and the user.
  • The control panel includes the following modules for system elements:
    • Operation module
    • Faults module
    • Camshaft position sensor module
    • Crank shaft position sensor
    • ECT sensor module
    • Battery terminals module
    • Ignition signals module
    • Injector signals module
    • Throttle valve module
    • MAF & IAT sensors module
    • Acceleration pedal sensor module
    • Fuel level sensor module
    • Fuel pump module
  • Each component represented in the above modules is provided with dedicated safety sockets internally connected to the real component to allow connecting external measuring devices for examination.
  • A real gear shift stick of the FWD transmission is integrated into the control panel to allow gear shifting.
  • The operation module includes the following switches & LEDs :
    • Ignition switch module
    • Emergency switch
    • DLC module
    • Dash board module
  • Using the key in the ignition switch module, the instructor will be able to start the engine exactly as it happens in real cars.
  • Fixed on the front side of the unit chassis a button used to switch between the two fuel types.
  • A real acceleration pedal is integrated into the control panel to allow increasing the engine speed.
  • DLC modules is used to connect external fault diagnosis device.
  • The unit is capable of simulating 20 petrol/natural gas engine system faults using faults insertion switches on the control panel.
  • The educational unit is provided with a schematic diagram of the petrol engine components showing it internal parts.
  • Dashboard enables the trainee to observe car speed and to study its behaviour under acceleration.
  • The engine condition is refurbished by default ,where it has undergone a complete overhaul and has received a paint job.
  • The trainer is mounted on four heavy duty caster wheels able to carry the system weight for better mobility.
  • Caster wheels are equipped with foot-operated brakes to lock the wheels and help fix the unit and prevent sliding.