Losses in a Pipe System
(FM - 007)

1 Annular chambers with pressure tapping nipples. 2 Ball cocks for shutting off part sections 3 Back wall 4 Double pressure gauge 5 Inlet (concealed) 6 Tubular steel frame with suction pads 7 Adjustable measuring section. 8 Drain. 9 Measuring sections

  • Pipe flow with friction.
  • Coefficients of resistance for Pipe elbow
  • Coefficients of resistance for Cross-section change
  • Coefficients of resistance for Pipe branch
  • Coefficient of resistance for pipe fittings
  • Opening characteristics of shut-off devices
  • Volumetric flow measurement with nozzle/orifice
  • Volumetric flow measurement with Venturi tube
  • Pipe section to hold fittings or measuring objects
    • 20 × 1,5mm, PVC
  • Pipe Sections
    • Inside diameter: d
      • straight: d=25 × 1,5mm, length: 800mm, PVC
      • sudden contraction: d=25× 1,8-16 × 1,5mm, PVC
      • sudden enlargement: d=16 × 1,5-25 × 1,8mm, PVC
      • with 2 × Y-piece 45° and 2 × T-piece
      • with 2 × 90° elbow/bend: d=2016 × 1,5mm, PVC and
      • 2 × 45° elbow: d=16 × 1,5mm, PVC
      • 2 × twin tube manometers: 0…1000 mmWC
  • Measuring Ranges
    • Pressure: 0…0,1bar
  • Losses in a Pipe System (FM - 007)
  • Hard copy user manual

The losses in a pipe system kit is a bench top kit which is designed to illustrate the pressure losses in pipes, piping elements and shut-off devices. In addition to using the differential pressure method for measuring the flow rate.

                                     
  • The educational unit contains six different pipe sections capable of being shut off individually.
  • The pipe sections are equipped with piping elements such as sudden contraction, sudden enlargement, Y-pieces, T-pieces, corners and bends.
  • In one pipe section, different shut-off devices and measuring objects are installed.
  • The unit is supplied with different measuring objects for determining the flow rate according to the differential pressure method.
  • The measuring objects are made of transparent material and provide excellent insight into the inner structure.
  • The measuring objects include Venturi nozzle, orifice plate flow meter and measuring nozzle.The shut-off devices include angle seat valve and gate valve.
  • The pressure measuring points in the piping system are designed as annular chambers. This creates a largely interference-free pressure measurement.
  • The opening characteristic of the shut-off devices are also recorded. The pressures are measured with tube manometers.
  • The experimental unit is positioned easily and securely on the work surface of the main hydraulic unit.
  • The water is supplied and the flow rate measured by the main hydraulic unit.