You have searched for
IoT Smart Health Kit
(IOT - 005)
  • IoT Smart Health Kit (IOT-005)
  • Hard copy user manual

The IoT Smart Health Kit is an application of health care with IoT. up to 9 bio-signals can be measured by the kit in addition to the DUST sensor such as ( SPO2, EMG, PCG, BT, GSR, BioZ, ECG, R-to-R, Pace Detection. A touch 10 inch LCD has been introduced for displaying bio-signals. A rechargeable battery has been introduced for each bio sensor module, communication to its controller is available by Wi-Fi And Bluetooth. On board charging for all Bio-signals modules to eliminate external charging cables. Provide linking with Android devices.

                                     
  • • Learning about bio-signals and the measurement algorithms.
    • Learning about communication over WiFi and Bluetooth.
    • Learning about UART, I2C, SPI communications and ADC.
    • Learning about the theory of measurement of SPO2.
    • Learning about the theory of measurement of EMG.
    • Learning about the theory of measurement of PCG.
  • • Learning about the theory of measurement of BT.
    • Learning about the theory of measurement of GSR.
    • Learning about the theory of measurement of BioZ.
    • Learning about the theory of measurement of ECG.
    • Learning about the theory of measurement of R-to-R and Pace Detection.
    • Learning about data collection via the Main-Controller
  • Learning about how to configure and build a web server by Lighttpd
  • Software Specifications:
    • Operating System for The Main IoT Controller :
      • Raspberry Pi OS (a Debian-based operating system for Raspberry Pi)
  • Hardware Specifications:
    • Main AIoT Controller Based on Raspberry Pi 4 Model B :
      • CPU : Broadcom BCM2711 Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
      • GPU :
        • Broadcom VideoCore VI
        • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
        • OpenGL ES 3.1, Vulkan 1.0
      • RAM : 4GB LPDDR4-3200 SDRAM
      • Wi-Fi :
        • 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless (Dual band)
        • backward compatibility to 802.11a/b/g/n
      • Bluetooth :Bluetooth 5.0, Bluetooth Low Energy (BLE)
      • Ethernet : Gigabit Ethernet 943 Mbps
      • Ports :
        • 2 x micro-HDMI 2.0 (up to 4Kp60 supported).
        • 4-pole stereo audio and composite video port.
        • 2 x USB 2.0.
        • 2 x USB 3.0.
        • 1 x USB-C.
        • Gigabit Ethernet.
        • Camera Serial Interface (MIPI CSI).
        • Display Serial Interface (MIPI DSI)
      • I/O : GPIO,UART,I2C,SPI,3 Channels ADC
      • Storage : Micro-SD card slot for loading operating system and data storage
      • LCD : 10 inch Touch LCD
    •  Included Pre-built Modules :Bio-signals Modules
      • SPO2 Bio-signal Module Sub Controller:
        • Based On ATMEGA 128
        • Rechargeable Battery Included
      • EMG Bio-signal Module Sub Controller:
        • Based On ATMEGA 128
        • Rechargeable Battery Included
      • PCG Bio-signal Module Sub Controller:
        • Based On ATMEGA 128
        • Rechargeable Battery Included
      • BT Bio-signal Module Sub Controller:
        • Based On ATMEGA 128
        • Rechargeable Battery Included
      • GSR Bio-signal Module Sub Controller:
        • Based On ATMEGA 128
        • Rechargeable Battery Included
      • BioZ, ECG, R-to-R and Pace Detection Bio-signals Module Sub Controller:
        • Based On STM32
        • Rechargeable Battery Included
      • All Required Bio-Signals Connectors To Human Body
    • Other Modules : DUST Sensor Module