Mobile Applications Development Kit introduces pre-connections between The Main Controller and The Kit’s Devices For easy to use and fast working with the kit while focusing on The Software layer objectives. Artificial Intelligence Computing Capability through the 5 TOPS Main Controller based on AMLogic A311D ,in addition to Neural Processing Capability, Supports all major deep learning frameworks including TensorFlow and Caffe, Main Controller Module Including four Cortex-A73 @2.2GHz and two of Cortex-A53 @ 1.8GHz ,which supports large processing capability. Main Controller Module supported with 32GB eMMC which provides a large capacity for applications in addition to external SD Card storage An 1280 X 800 touch Screen included for observing the real behavior of the developed applications. Providing the software development for Android application development and Installation on the target main Controller, Developing in C/C++ by using of the Android Native Development Kit (NDK) Providing Arduino development through the Sub controller module included
- Software
- Main Controller:
- Based on Linux OS including the required drivers
- Android 9 Pie Platform
- Peripheral Modules And Sub Controller Packages
- Input Devices
- Linux: Button Switch Device Driver and Native Application
- Android: Button Switch Application
- Arduino: Button Switch Firmware
- Output Devices
- Linux: LEDs, Buzzer Devices Drivers and Native Application
- Android: LEDs, Buzzer Android Application
- Arduino: LEDs, Buzzer Firmware
- Display Devices
- Linux: 7-Segment and Text LCD Devices Drivers and Native Application
- Android: 7-Segment & Text LCD Android Application
- Arduino: 7-Segment & Text LCD Firmware
- Sensors
- Linux: Humidity And Temperature ,CDS, Variable Resistor Devices Drivers and Native Applications
- Android: Humidity And Temperature ,CDS, Variable Resistor Android Applications
- Arduino: Humidity And Temperature ,CDS, Variable Resistor Firmware
- Actuators
- Linux: Stepper Motor, Vibrator Devices Drivers and Native Applications
- Android: Stepper Motor, Vibrator Android Applications
- Arduino: Stepper Motor, Vibrator Firmware
- Hardware
- Main Controller Module
- CPU: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53
- GPU: Mali G52 MP4 at 800MHz
- Decoding: Supports multi-video decoding up to 4Kx2K@60fps+1x1080P@60fps
- Encoding: H.265 & H.264 at 1080P@60fps
- RAM: 4GB LPDDR4/X1608MHz, 32bit
- eMMC: Onboard, 32GB
- SPI Flash: 16 MB
- Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS
- Wi-Fi: 2T2R AC Wi-Fi with RSDB Features
- Bluetooth: Bluetooth 5.0
- Ethernet: Gigabit Ethernet 1Gbps
- Ports: USB 3.0 ,USB-C
- Display : MIPI-DSI
- Camera : MIPI-CSI
- 40 Pin GPIO Header (USB, I2C, I2S, UART, ADC)
- I/O: Sound : Microphone , Speaker
- Camera: 8 MegaPixel ,3280 × 2464 pixels
- Display: HDMI 7 inch 1280 X 800 With Capacitive Touch
- Storage:
- M.2 Connector for NVMe SSD
- Micro SD Card 8 GB
- Included Modules
- Display:
- One of 7 Segment (4 Digits) ,
- One of LCD 2X16
- Inputs: 5 X switches
- Outputs: 8 X LEDs , 1 X Buzzer
- Actuators: 1 X Stepper Motor, 1 X Vibrator
- Sensors: 1 X Humidity and Temperature sensor, 1 X CDS , 1 X Variable Resistor
- MCU: Atmega2560, Clock 16MHz
- USB Controller: ATmega8U2
- GPIO:
- Digital I/O : 54 Pin
- Analog Input : 16 Pin