IoT Smart Health Kit
(IOT 104)
- Learning about bio-signals and the measurement algorithms.
- Learning about communication over WiFi and Bluetooth.
- Learning about UART, I2C, SPI communications and ADC.
- Learning about the theory of measurement of SPO2.
- Learning about the theory of measurement of EMG.
- Learning about the theory of measurement of PCG.
- Learning about the theory of measurement of BT.
- Learning about the theory of measurement of GSR.
- Learning about the theory of measurement of BioZ.
- Learning about the theory of measurement of ECG.
- Learning about the theory of measurement of R-to-R and Pace Detection.
- Learning about data collection via the Main-Controller
- Learning about how to configure and build a web server
- IoT Smart Health Kit (IOT104)
- Hard copy user manual
The IoT Smart Health Kit is an application of health care with IoT. up to 9 bio-signals can be measured by the kit in addition to the DUST sensor such as ( SPO2, EMG, PCG, BT, GSR, BioZ, ECG, R-to-R, Pace Detection. A touch 10 inch LCD has been introduced for displaying bio-signals. communication to its controller is available by Wi-Fi or Bluetooth. On board power supply for all Bio-signals modules. Provide linking with mobile devices.
- Software Specifications:
- Operating System for The Main IoT Controller :
- Linux base OS (a Debian-based operating system for Raspberry Pi)
- Operating System for The Main IoT Controller :
- Hardware Specifications:
- Main AIoT Controller Based on Raspberry Pi 4 Model B Code: (IOT104.01)
- CPU : Broadcom BCM2711 Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- GPU :
- Broadcom VideoCore VI
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.1, Vulkan 1.0
- RAM : 4GB LPDDR4-3200 SDRAM
- Wi-Fi :
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless (Dual band)
- Backward compatibility to 802.11a/b/g/n
- Bluetooth :Bluetooth 5.0, Bluetooth Low Energy (BLE)
- Ethernet : Gigabit Ethernet 943 Mbps
- Ports :
- 2 x micro-HDMI 2.0 (up to 4Kp60 supported).
- 4-pole stereo audio and composite video port.
- 2 x USB 2.0.
- 2 x USB 3.0.
- 1 x USB-C.
- Gigabit Ethernet.
- Camera Serial Interface (MIPI CSI).Display Serial Interface (MIPI DSI)
- I/O : GPIO,UART,I2C,SPI,3 Channels ADC
- Storage : Micro-SD card slot for loading operating system and data storage
- LCD : 10 inch Touch LCD
- Main AIoT Controller Based on Raspberry Pi 4 Model B Code: (IOT104.01)
- Included Pre-built Modules Code: (IOT104.02)
- Bio-signals Modules
- SPO2 Bio-signal Module Sub Controller:
- Based On ATMEGA 128
- EMG Bio-signal Module Sub Controller:
- Based On ATMEGA 128
- PCG Bio-signal Module Sub Controller:
- Based On ATMEGA 128
- BT Bio-signal Module Sub Controller:
- Based On ATMEGA 128
- GSR Bio-signal Module Sub Controller:
- Based On ATMEGA 128
- BioZ, ECG, R-to-R and Pace Detection Bio-signals Module Sub Controller:
- Based On STM32
- All Required Bio-Signals Connectors To Human Body
- DUST Sensor Module
- SPO2 Bio-signal Module Sub Controller:
- Bio-signals Modules