We Make The Difference
AVR Microcontroller Trainer
(MEM-003)
  • AVR Microcontroller Trainer - (MEM - 003)
    • Main Kit (MEM-003.1)
    • Type A Communication kit(MEM-003.1.1)
    • Type A Actuator Kit (MEM-003.1.2)
    • Type A Sensors Kit (MEM-003.1.3)
    • Type-B Plug-in Modules (MEM-003.1.4)
  • Programming software
  • Sample codes
  • USB cable A to B 1.5 m
  • RS232 cable 1.5 m
  • Laboratory PC
  • Additional Kits (MEM-003.2)
    • Microcontrollers (MEM-003.2.1)
    • Additional type A Communication kits (MEM-003.2.2)
    • Additional type A actuators kits(MEM-003.2.3)
    • Additional type A Sensor kits(MEM-003.2.4)
    • Additional type-B Plug-in Modules(MEM-003.2.5)
  • Digital content (BI-01).

AVR micro controller kit (MEM-003) is a benchtop kit that tends to familiarize the trainee with the different microcontroller components and connections. The kit is designed in the form of a lightweight portable aluminum case equipped with a real microcontroller and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on Microchip AVR Microcontroller . Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . With the In-Circuit Debugger/Programmer, just what you need is a USB cable to PC, no more additional hardware components to apply programming codes . Easy to use and friendly kit.

                                     
  • AVR Microcontroller trainer consist of:
    • Embedded in circuit programmer /debugger (access via USB port with indication LEDs)
    • Microcontrollers supported as individual modules that plugged in to the Kit (default Plug-in module with kit «ATMEGA169PA SMD Module).
    • The trainer is also support these families of microcontrolller (not included, refer to optional section) (ATmega8535, ATmega32, ATmega128, ATmega2560)
  • Microcontroller working voltage selectable (+3.3 or +5V)
  • Integrated fixed DC power supply module: + 3.3V, +5V, +12V, -5V, -12V (Fuse Protected) with led indicators - accessed via 2mm sockets (for external modules)
  • Integrated variable DC power supply module:+1.25VDC to +5VDC or -1.25VDC to - 5VDC (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
  • 8 Digital switches (+3.3 or +5V) selectable
  • Integrated pulse generator from2 Hz : 1KHz ( level selectable +3.3V or +5V)
  • Dip switches for configuring microcontroller I/O Ports
  • 1 x AC power source socket (fuse protected) With ON/OFF switch
  • Pullup and pulldown resistor for every microcontroller pin (selectable between (pull-up, floating, Pull-down)
  • Indication LED for every microcontroller pin
  • Pushbutton for every microcontroller pin (selectable between VCC or GND signal)
  • Pin header male/female groups for every microcontroller PORT for external connections
  • Programming IDE: supports atmel studio 7 development environment, atmel start online tool and Mikroc For AVR
  • Includes ready to run codes for all included trainer components by atmel studio
  • Main Kit Code : (MEM-003.1)
    • Type A Communication Kit Code : (MEM-003.1.1)
      • 1 x (2 x 16 LCD Module) contrast adjustable via potentiometer
      • 1 x (64 X 128 GLCD module) contrast adjustable via potentiometer
      • 1 x I2C EEPROM type-a plug-in module
      • 1 X RS232 Interface Type-A Plug-in Module
      • 1 X UART To USB Interface Type-A Plug-in Module
    • Type A Actuator Kit Code : (MEM-003.1.2)
      • 1 X Seven Segment Type-A Plug-in Module
      • 1 X piezo buzzer type-A plug-in module
      • 1x stepper motor interface Through ULN23803.
      • 1 x DC motor interface
      • 1 x Servo motor interface
    • Type A Sensors kit Code : (MEM-003.1.3)
      • 2x potentiometers to simulate analog I/P to microcontroller (microcontroller connected pin selectable)
      • 5 X Type-A Plug-in Modules Holder ( For Type-A Plug-in Modules )
    • Type-B Plug-in Modules: Code : (MEM-003.1.4)
      • 1 X Type-B Plug-in Modules Holder ( For Type-B Plug-in Modules )
  • ATMEGA8535 (EM-003.2.1.1)
  • ATMEGA32 (EM-003.2.1.2)
  • ATMEGA128 (EM-003.2.1.3)
  • ATMEGA2560 (EM-003.2.1.4)
  • ATMEGA169PA (EM-003.2.1.5)
  • WIFI
    • Signal Type : UART
    • Signal Level :5V or 3.3V
    • SMD
  • Audio In & Out
    • Signal Type : SPI
    • Signal Level : 3.3V
  • SD Card
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Ethernet
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Bluetooth Module
    • Signal Type : UART
    • Signal Level :5V
  • RF Transceiver
    •  
    • Signal Type : SPI
    •  Signal Level :5V
  •  UART To RS-232
    • Signal Type : UART
    • Signal Level :5V or 3.3V Selectable
  • Serial EEPROM
    • Signal Type : I2C
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • Relay
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • RGB LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Limit Switch
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Push Button
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Laser
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • 8x8 LED Matrix
    • Signal Type : SPI
    • signal level : 5V or 3.3V
  • Light Sensor (CDS Photoresistor)
    • Signal Type : Analog and Digital
    • Signal Level :5V or 3.3V Selectable
  • Tilt Sensor
    • Signal Type : Digital- Signal
    • Level : 5V or 3.3V Selectable
  • Mercury Sensor (Switch):
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Reed Sensor (Switch)
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Flame Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Touch sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Opto Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Knock Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Thermistor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • Humidity And Temperature sensor (DHT11)
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • Vibration Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Water Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • DS18B20 Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Barometer Sensor
    • Humidity, barometric pressure and ambient temperature BME280
    • Signal Type : I2C
    • Signal Level : 3.3V
  • IR Reflective
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • IR Receiver
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • LM35
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Sound Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • GY-87 Sensor
    • 3-axis Gyroscope + 3-axis acceleration + 3-axis magnetic field + air pressure
    • Signal Type : I2C
    • Signal Level : 5V or 3.3V
  • Ultrasonic Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • PIR Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Keypad 3 X 4
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • 7 Segment
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V