Computer Interface Base Unit with Built-in Power Supply
(MS-001)

1.50 - Pins D Sub Socket, 2.Fixed DC Power Supply, 3.Variable Power Supply, 4.4 - Channel Differential Oscilloscope, 5.4 - Channel Differential Oscilloscope Fuse, 6.Two Digital Multimeters (DMM1 & DMM2) 7.Multimeter Fuses, 8.Digital Outputs, 9.Digital Iutputs, 10.Relay Outputs, 11.Function Generator, 12.Digital Pattern Generator, 13.Logic Analyzer

  • Computer interface base unit with built-in power supply - (MS - 001)
  • Hard copy user manual
  • PC

Computer interface base unit with built-in power supply is a benchtop kit provides trainees a wide range of meters and sources that are crucial tools to test, power, and verify many components integrated in different fields (electrical, electronics, etc.). It incorporates all inputs and outputs, switches, power and signal sources and measurement circuitry needed to perform experiments. The kit is designed to accommodate different types of systems and to be connected to other experimenter modules based on the training program to be applied and can be controlled via the connected PC.

                                     
  • Including the following modules
    • Fixed dc power supply 3.3v;0.8a
    • Fixed dc supply +5v;1.5a / -5v;1.5a
    • Fixed dc supply +12v;1.5a-12v;1.5a
    • Fixed dc supply +15v;1.5a-15v;1.5a
    • Adjustable dc power supply, v1, v2, v3 (-20v - +20 v), 1.5 A
    • Three-phase power supply 0 - 150 hz, 0 - 14 vrms, 2 a
    • Three-phase power supply with adjustable phase-shift.
    • 2 X voltmeter auto range up to 500v DC, 460Vrms AC
    • • 2 X ammeter auto rang up to 10a ac/ dc
    • • 2 X resistance measurement up to 60 mohm
    • • 2 X capacitance measurement from 10 nF up to 2000 μF
    • Inductance meter from 100 uH to 500 mH (Q<=50 , Q>1 at 1kHz)
    • 2 X temperature measurement(-273 C-400 c), diode, frequency(0 to 6 MHz) and continuity testa
    • 64-Bit processor
    • Measurements storage memory
    • Plug-in board for all training cards
    • Set of measurement accessories and leads
    • 8-Bit digital signal output accessed via 2- mm sockets, ttl/cmos, clock frequency:
      • 100 khz, electric strength 0 to 24V
    • 8-Bit digital signal input, accessed via 2mm sockets, memory depth 16-bit x 2 k, ttl/cmos, sampling rate 0 – 100 khz, electric strength 0 to 24V
    • 16-bit digital I/O (8-bit digital inputs & 8-bit digital outputs), ttl/cmos sampling rate 100 msps, adjustable voltage ranges from 1.8v to 3.3v,
    • 8 Relays 24v 1a dc for multi usage as fault troubleshooting
    • Usb2.0 Interface of a transfer speed of 480mbps, usb3.0 2.5gbps & vga interface.
    • 4-Channel Oscilloscope with 100 mhz band width, safe for voltages up to 200 Vp-p, sampling rate 200 Msps, 11 voltage/div ranges & 25 time/div ranges, inputs via bnc (4 inputs) or 2-mm sockets (4 inputs).
    • • 2-channels for current measurement, overcurrent-protected including 4 different ranges up to 5A, sampling 100 Msps.
    • Function generator with adjustable amplitude up to 10Vp-p , adjustable offset from -10V to 10V and adjustable frequency from DC up to 10MHz (BNC Connection).
    • Embedded controllers.
  • The training system is provided with the following virtual measuring instruments:
    • Vi for fixed dc supplies
    • Vi for adjustable dc power supply ( -20 v to + 20 v)
    • Vi for three phase power supplies
    • Vi for multimeter (voltmeter-ammeter- rlc meter - Temperature - Diode test -continuity test).
    • 16 Digital outputs, 16 digital inputs. Display modes: binary, hex, decimal and octal numerals.
    • 4-Channel oscilloscope: band width 100 mhz, 25-time ranges, 100 ns/div to 10 s/div, 11 ranges 10mV/div to 20 V/div, trigger and pre-trigger, xy and xt modes, cursor function, addition and multiplication function for 2 channels
    • Spectrum analyzer: 9 voltage ranges 100 mv to 50 v, input frequency range 3 hz to 10 mhz, time domain display
    • Bode-plotter: 9 voltage ranges 100 mv to 50 v, frequency range 1 hz - 10mhz, time domain display and locus diagram
    • Function generator: 0.5 Hz - 10 mhz - 10 Vp-p, sine, square, triangular.
    • Arbitrary waveform and pulse generator
    • Power meter
  • Digital software
    • Digital courses version for student without experiments solutions and for teacher with experiments solutions
    • Open source and not limited for specific period
    • Digital experiment set-ups.
    • Measurement & graphics can be saved within the experiment instructions by means of drag & drop.
    • Virtual instruments can be started directly from the experiment instruction pages questions with feedback and evaluation logic for checking student progress.
    • Print compatible document for printing of experiments instructions with solutions.
    • Include all measuring and control instrumentation to run the experiments.