We Make The Difference
Automatic Control Sensors Trainer
(MSA - 003)

1.Breadboard module, 2.Heating and cooling module, 3.Weight scale to analog converter, 4.Load cell module, 5.Input/output module, 6.Inverter & Non-inverter AMP, 7.Comparator AMP, 8.Lamp/Buzzer module

  • Measuring linear distance
  • Measuring the Speed of a Rolling Object
  • Detecting objects using emitter and collector
  • Detecting black & white Colors
  • Detecting non-metallic objects
  • Detecting metallic objects
  • Detecting Objects using proximity sensor
  • Load Cell
  • Retracting cylinder
  • Position Slide Module
    • Resistance range: (Rn) 2.5 kΩ /100 mm distance
    • Resistance tolerance: 30 %
    • Electrical distance: 50 – 500 mm
    • Independent linearity: 2 %
    • Resolution: < 0.1mm
    • Load resistance: > 100* Rn
    • Max. load current in case of fault: 5 mA
    • Typical supply voltage: 5 VDC
    • Lifetime: 50 million cycles
    • Travel speed: ≤ 3 m/s
    • Cable connection L: 46 mm; W: 10.16 mm
    • Max. measuring distance from magnet to sensor: 2 mm
    • Type of mount Adhesive film
    • Operating temperature: −10°C ...
      + 70°C
    • Protection class IP 65
  • Rotary Encoder Module
    • Power requirements: 5- 24 V DC
    • Power ripple: max 3 % rms
    • Power consumption: max 60 mA
    • Output type: Transistor
    • Shaft allowance load: radial 5kg, thrust 3kg
    • Maximum revolution: 5000 rpm
  • Hall Sensor Module
    • Product type magneto resistive digital position sensor
    • Package style plastic bushing
    • Supply voltage: 6.0 Vdc to 24.0 Vdc
    • Output type sink
    • Termination type: 152,4 mm [6.0 in] stranded lead wires
    • Magnetic actuation
    • Operating temperature range: -20 °C to 85 °C [-4 °F to 185 °F]
    • Output voltage: 0.4 Vdc max.
  • Motion Detector Sensor Module
    • Range: 0.15 to 6 m
    • Resolution: 1 mm
  • Rotary (Photogate) Sensor Module
    • Power requirements: 5v DC at 40 mA
    • Infrared source: Peak at 880 nm
    • Output is high and LED off for unblocked gate
    • Output is low and LED on for blocked gate
    • Beam approximately 9 mm from the end of the gate arms
  • Optical (Emitting) Sensor Module
    • Type: Small and light (old) type
    • Sensing type: Through Beam
    • Sensing distance: 5 m
    • Operation mode: Light & Dark
    • Control output: PNP
  • Optical (Collecting) Sensor Module
    • Type: Small and light (old) type
    • Sensing type: Through Beam
    • Sensing distance: 5 m
    • Operation mode: Light & Dark
    • Control output: PNP
  • Optical (Main) Sensor Module
    • Display: Single
    • Output: NPN
    • Type: Amplifier
    • Beam source: Red
  • Optical (Fiber) Sensor Module
    • Sensing type: diffuse
    • Sensing distance: 60 mm
    • Head form: standard (M3 Bolt)
    • Hood Diameter: 3 mm
    • Cable length: 2 m
    • Cable type: standard type (-40 to 70 C)
    • Fiber diameter: 0.5, 0.25 x 9 mm coaxial
  • Optical (M18) sensor module
    • Operating voltage: 10-30 VDC
    • Output method: PNP
    • Output current: max 150 mA
    • Current consumption: max 25 mA
    • Sensing distance: 30 cm
    • Sensing direction: horizontal
    • Response time: 2 ms
  • Inductive proximity (M18) sensor module
    • Operating voltage: 10-30 VDC
    • Power ripple: <20% peak to peak
    • Output current: max 150 mA
    • Current consumption: <10 mA
    • Output status: NO
    • Output method: PNP
    • Sensing direction: 5mm
    • Response frequency: 800 Hz
  • Load-Cell Sensor Module
    • Ultra-low deflection
    • Robust strain relief
    • 17-4 PH stainless-steel construction
    • For use in compression
    • Utilizes metal foil strain gauge technology
    • Rated output (RO): 1 mV/V nom (25 lb)
    • 2 mV/V nom (50 lb)
    • Excitation (VDC or VAC) 18 max
    • Bridge resistance 350 Ohm nom
    • Insulation resistance ≥500 M ohm @ 50 VDC
    • Connection #29 AWG, 4 conductor, spiral shielded Teflon cable 10-ft [3 m] long
    • Weight (approximate) 0.7 oz [20 g]
    • Safe overload 150% of RO
    • Material PH stainless-steel
    • Max measuring Range: 50 lb (22kg)
  • Automatic control sensors trainer- (MSA - 003)
  • Set of components (main & auxiliary)
  • BEDO Software 
  • Hard copy user manual
  • Laboratory PC

Automatic control sensors trainer ( MSA – 003) is an advanced comprehensive system which demonstrates almost any type of sensors the user can come across in automatic control applications. The trainer is equipped with a wide range of sensors’ modules in addition to powering modules. Using safety connecting cables & the provided software, trainees will be able to connect between different modules to perform experiments . BEDO software is capable of recording & displaying the sensors’ readings and measurements on a PC screen.

                                     
  • Automatic control sensors trainer is equipped with a grooved panel for easy fixation of the system modules.
  • The trainer is equipped with different modules including main controller modules, sensors modules and auxiliary modules.
  • Main controller modules included are:
    • Sensor controller module
    • Power Supply & Breadboard module
    • High Ampere power Supply module
    • OP-Amp & comparator Amp module
    • Voltage / current module
    • Breadboard module
    • Input / output module
    • Lamp / buzzer module
  • Sensors modules included are:
    • Hall sensor module
    • Motion detector sensor module
    • Rotary (photogate) sensor module
    • Optical (emitting) sensor module
    • Optical (collecting) sensor module
    • Optical (main) sensor module
    • Optical (fiber) sensor module
    • Optical (M18) sensor module
    • Inductive proximity (M18) sensor module
    • Capacitance proximity (M18) sensor module
    • Load-cell sensor module
  •  Auxiliary modules included are :
    • Working board
    • Heating & cooling module
    • Illumination module
    • Position Slide module
    • Rotary encoder module
    • Air pressure module
  • Additional modules (Optionally supplied)
    • Main Sensors Modules :
      • CDS Sensor module
      • Photo-diode sensor module
      • Photo-transistor sensor module
      • Thermistor (NTC) sensor module
      • Thermistor (PTC) sensor module
      • Thermistor (CTR) sensor module
      • PT temperature sensor module
      • Microphone sensor module
      • PH sensor module
    • Auxiliary Modules:
      •  Tuning fork module
      •  Chemistry experiment stand
  • for some modules , a schematic diagram of the circuit or component is printed on its front panel for better understanding of the system wiring while performing experiments.