We Make The Difference
Temperature & Pressure Measurements System
(MSM-013)

1.Pressure gauges, 2.Pressure gauges inlets, 3.Schematic diagram, 4.Filter regulator, 5.Emergency switch, 6.POperation module, 7.PT100 RTD module, 8.PT1000 RTD sensor holder, 9.Thermocouple module 1, 10. Thermocouple module 2, 11.Beaker, 12.Heater plug, 13.Lubricant. 14.Heater, 15.Accessories drawer

  • Familiarization with most common types of temperature and pressure sensors & their principle of operation.
  • Measurements of boiler water temperature using (PT100 RTD, PT100 RTD & TC)
  • Studying the Seed beck effect of thermocouple.
  • Measurements of pressure using different types of pressure gauges.
  • Introducing trainees to the thermoelectric effect.
  • Heater
    • Display: LCD
    • Power: 515 W
    • Heating output: 500 W
    • Voltage: 100-120/200-240 V, 50/60Hz
    • Stirring positions: 1
    • Max. stirring quantity (H2O): 3 Liter
    • Stirring speed range: 200 to 1500 rpm
    • Speed display resolution: 1 rpm
    • Temperature range: Room temperature to 280°C
    • Temperature accuracy: ±1°C
  • Regulator
    • Refrigerant: Air
    • Maximum Working Pressure: 0.95Mpa(135psi).
    • Pressure Regulating Range: 0.05~0.85MPa (7-121psi).
    • Guarantee Pressure Resistance: 1.5Mpa (213psi).
    • Environment &Fluid Temperature: 5 to 60oC.
    • Oil Mist Detector Oil for Advice: ISOVG32.
  • Air compressor
    • 10 Bar
    • 12 volt
  • Vacuum pump
    • 1/4 HP
    • 5 pascals
  • Temperature sensor PT100 RTD
    • Liquid probe, stainless-steel shell (silicon cable)
    • Range: -60 to +150°C
    • Accuracy: ±0.5°C
    • 1.5m silicone cable.
  • Vacuum gauge
    • Range: -100 mbar to 0 mbar
    • Resolution: 20 mbar
  • Glycerin pressure gauge
    • Liquid: Glycerin
    • Range: 0 to 10 bar
    • Resolution: 0.1 bar
  • Pressure gauge 1
    • Range: 0 to 10 bar
    • Resolution: 0.25 bar
  • Pressure gauge 2
    • Range: 0 to 10 bar
    • Resolution: 0.25 bar
  • Temperature & pressure measurements system - (MSM-013)
  • Hard copy user manual

Temperature & pressure measurements system (MSM-013) is designed to introduce the trainees to the most common types of pressure gauges and temperature sensors used in industrial applications . Also, it allow steam to study their principle of operation and the most suitable applications for each type. In addition ,trainees will enhance their skills in taking the readings through a wide range of laboratory experiments.

                                     
  • The system consists of a stand-alone training unit in addition to an accessories kit included in the unit drawer.
  • The educational unit features various types of temperature and pressure measurement devices.
  • Pressure measurement devices included are:
    • Dry pressure gauge
    • Liquids filled pressure gauge
    • Vacuum pressure gauge
    • Bourdon Tube
  • The latter is used to observe the operating mechanism & internal construction of the pressure gauge.
  • The system is equipped with necessary components needed to perform pressure measurements experiments such as: 
    • Air compressor
    • Vacuum pump with its lubricant
    • Filter-regulator unit
  • Air compressor used to supply air to the dry and glycerin type pressure gauges.
  • Vacuum pump used to create vacuum needed for the vacuum type pressure gouge.
  • Filter-regulator unit is used to control the air pressure and suction.
  • Temperature measurements sensors included are:
    • Pt100 rtd sensor
    • Pt1000 rtd sensor
    • Two types of thermocouple
  • The system is equipped with necessary tools needed to perform temperature measurements experiments such as:
    • Heater & beaker
    • 3 Temperature digital displays
  • One digital display is used to display temperature of both pt100 & pt1000 sensors in Celsius (c°).
  • The other digital display is used to display the temperature of the first thermocouple in Celsius (c°).
  • The last digital display is used to display the temperature of the second thermocouple in millivolt.
  • The heater provided is equipped with a magnetic stirrer to ensure a homogeneous temperature distribution through the water molecules inside the water beaker.
  • The heater is equipped with a knob to set the temperature, and another knob for setting stirring speed, in addition to a digital display to display the temperature and the stirring rate.
  • The educational unit operation module contains on/off switch, air compressor switch, vacuum pump switch, and heater switch in addition to operation switches for each temperature measuring device (rtd sensors and thermocouples).
  • Emergency switch is used to disconnect the unit in any emergency.
  • A schematic diagram of the pressure gauge is printed on the front panel showing its components.
  • The accessory kit includes the group of system components which are not fixed on the front panel such as:
    • Pt100 & pt1000
    • Heater
    • Oil for vacuum pump
    • Beaker
    • Power cable
    • Air hose
    • Test jumpers & etc.