Production Digital Multimeter

• Features
  • 15 measurement functions, including capacitance, temperature and digitizing
  • Expanded measurement ranges: 10pA to 10A and 1 mohm to 100 Mohm
  • Large 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
  • Large internal memory stores up to 7 million readings
  • Multiple language modes: SCPI, TSP® scripting, Keithley 2000 SCPI emulation, Keysight 34401A SCPI emulation

Main Power Control

• Overview
  • ON / OFF Switch
  • Emergency Stop
  • Power ON
  • AC Voltmeter
  • MCB & RCCB
  • Light Switch
  • 2x 220 VAC

Adjustable DC Power Supply

• Features
  • Get three isolated, independent, and adjustable outputs in one instrument
  • Output a total of 195W of power with two 30V@3A outputs and one 5V@3A output
  • Set voltage outputs with 0.06% basic accuracy and current outputs with 0.2% basic accuracy
  • Output DC power with less than 5mVp-p noise
  • Display voltage and current measurements continuously from all three outputs
  • Double output levels by connecting the two 30V channels in series or parallel

Flow Terminal

• Highlight
  • ± 0.125 % of reading—lowest uncertainty for gas flow calibration
    • The new molbox1+ flow terminal from Fluke Calibration represents a significant update to the molbloc/molbox gas flow calibration system. molbox1+ combined with molbloc-L (to 100 slm) and molbloc-S (to 5000 slm) flow elements enables you to achieve the lowest uncertainty available for gas flow meter calibration and controller calibrations. A special configuration, molbox1+S, allows you to use molbloc-S sonic nozzle flow elements at higher pressures than were previously possible, greatly extending their usable flow range.

Variable AC Supply

• Features
  • Variable output voltage:
    • 0 to 110 % above line input
  • 0 to 265 V 50 Hz, 10 A at 240 V input
  • 0 to 121 V 50 Hz, 10 A at 110 V input
  • Simple analogue deviation control
  • 0 to 10 A output current
  • Two digital displays for voltage & current
  • 4-digit resolution & bar graph display
  • Input fuse 10 A slow blow
  • Various socket types available

Sonic Nozzle Calibration Device

• Highlights
  • Sonic nozzle based molblocs for gas flow up to 5,000 slm
    molbloc-S® Sonic Nozzle Flow Element is a high precision transfer standard intended for calibrating other transfer standards or process flow meters and controllers. This sonic nozzle calibration device is used with molbox1+ or molbox RFM™ terminals to extend the range of molbloc/molbox™ calibration systems and deliver superior accuracy at medium and high flows. Existing molbox1 terminals with version 4.0 embedded software or later and all molbox1+ terminals can be used with molbloc-S.

Laminar Flow Element

• Highlights
  • Laminar flow elements for flow from 1 sccm to 100 slm
  • molbloc-Ls are laminar flow elements for use with molbox mass flow terminals. The molbloc flow path is the longitudinal, annular gap between a piston and a close-fitting cylindrical bore in the molbloc body. Different molbloc ranges are obtained by varying the size of the gap. For high flow ranges (size 1E4 and above), a larger molbloc body with a larger cylindrical bore is used.

Mounting Systems

• Highlights
  • For molbloc-L Mass Flow Elements
  • molstic molbloc mounting systems are available to assist you in realizing the full performance benefits of your molbloc/molbox™ system. molstics provide an engineered solution to the practical issues of mounting the molbloc, connecting a gas supply, regulating the pressure and connecting the device to be tested. Highest quality components are integrated into a compact assembly to assure optimum molbloc/molbox performance

Control Box

• Features
  • Set and read gas mass flow controller and mass flow meter instruments
  • Set and read 0 to 5 V or 4 to 20 mA on two (2) channels simultaneously
  • Complete front panel local control and remote operation via RS-232 and IEEE-488 interfaces
  • Includes advanced features such as two (2) channel sum, difference and ratio
  • Displays in V, mA, % FS and flow units
  • Handles gas conversion (K) factors automatically

Mounting System

• Highlights
  • For molbloc-S Mass Flow Elements
  • molstic-S™ provides an engineered solution to the practical issues of mounting molbloc-S® mass flow elements, connecting a gas supply, regulating the operating pressure and connecting the device under test (DUT). A filter is included on the 1/4-inch molstic-S to protect the smaller molbloc-S elements from contamination. Highest quality components are integrated into a convenient, compact, modular assembly to assure optimum molbloc®/molbox™ performance. all the performance and flexibility you need

Switchbox™ for molbox1+ and MFC-CB™

• Highlights
  • MFC Switchbox supplies power and switches between up to five MFC or MFMs on one molbox1+ or MFC-CB channel.
  • The MFC switchbox is an accessory to the molbox1+ MFC option and MFC-CB mass flow control box. This accessory continuously powers up to five MFCs and/or MFMs (DUTs) and allows switching control between them on one molbox1 or MFC-CB channel.
• Specifications
  • Power requirements: 85 to 264 V ac, 50 to 60 Hz, 55 VA max consumption
  • Cooling: Active fan driven air circulation
  • MFC power supply: ± 15 V, 260 mA per channel on up to five channels

Test Equipment Asset Management Software

• MET/TEAM calibration management software enables you to:
  • Manage all aspects of your calibration operation with one paperless solution
  • Improve productivity and reduce operating costs
  • Maintain compliance with regulatory standards
  • Configure and customize for your business rules
  • Report to meet a wide range of requirements
  • Schedule maintenance events
  • Perform batch receiving
  • Create, track and close work orders
  • Track assets as they move through the lab

Calibration Management Software

• Highlights
  • COMPASS® for Flow is a fully customizable macro-enabled mass flow calibration software package based on the COMPASS® for Pressure software platform. Unlike its predecessor, COMPASS® for molbox, COMPASS® for Flow natively supports non-Fluke Calibration flow references, making it a universal mass flow calibration program. References that have a supported remote interface can be fully automated. A built-in macro capability provides users a tool to perform complex real time flow computations, as well as alter the test scenario based on data collected.