Production Digital Multimeter

• Features
  • 15 measurement functions, including capacitance, temperature and digitizing
  • Expanded measurement ranges: 10pA to 10A and 1 mohm to 100 Mohm
  • Large 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
  • Large internal memory stores up to 7 million readings
  • Multiple language modes: SCPI, TSP® scripting, Keithley 2000 SCPI emulation, Keysight 34401A SCPI emulation

Frequency Counter

• 300 MHz, 3 GHz, 20 GHz Models
• 300-400 MHz in Manual Trigger Mode
• Up to 3 Input Channels
• 50 ps Single-shot Time Resolution
• 12 Digit/s Frequency Resolution
• 0.001° Phase Resolution
• 3 mV or better Voltage Resolution
• Optional 5×10–8 High-stability Oven Time Base

Adjustable DC Power Supply

• Features
  • Get three isolated, independent, and adjustable outputs in one instrument
  • Output a total of 195W of power with two 30V@3A outputs and one 5V@3A output
  • Set voltage outputs with 0.06% basic accuracy and current outputs with 0.2% basic accuracy
  • Output DC power with less than 5mVp-p noise
  • Display voltage and current measurements continuously from all three outputs

Oscilloscope

• Features
  • 7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
  • 32 automated measurements
  • Dual window FFT with simultaneous time and frequency domain views
  • Trigger frequency counter
  • Pan and Zoom capability
  • Multi-language user interface with support for 10 languages

Function Generator

• Features
• Continuous, sweeping, burst, and modulation modes (AM, FM, PM, ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done
• 64-MByte internal non-volatile memory for arbitrary waveform storage
• Built-in 200 MHz counter with 6-digit resolution offers an easy and precise way of frequency/period/pulse width/duty cycle measurement
• Standard USB host/device for memory expansion and remote control

Variable AC Supply

• Features
  • Variable output voltage:
    • 0 to 110 % above line input
  • 0 to 265 V 50 Hz, 10 A at 240 V input
  • 0 to 121 V 50 Hz, 10 A at 110 V input
  • Simple analogue deviation control
  • 0 to 10 A output current
  • Two digital displays for voltage & current
  • 4-digit resolution & bar graph display
  • Input fuse 10 A slow blow
  • Various socket types available

Main Power Control

• Overview
  • ON / OFF Switch
  • Emergency Stop
  • Power ON
  • AC Voltmeter
  • MCB & RCCB
  • Light Switch
  • 2x 220 VAC

27 GHz Low Phase Noise Reference Source

• Highlights
  • “Self-characterization” lets you avoid calculating correction factors for each component in the signal delivery system
  • “What you set is what you get” accurate signal delivery direct to the UUT input up to 27 GHz
  • Covers a broad range of RF calibration workload
  • Reduces the number of instruments and interconnections required for your RF calibration system
  • Integrated 300 MHz frequency counter and dual power meter readout eliminate need for additional instruments

Loop Calibrator

• Highlights
  • The 9600FLT 1 GHz Wide Offset Phase Noise Filter accessory is for high-performance spectrum analyzer wide-offset phase noise tests. The filter connects easily to 96xx Reference Source models in bench top or rack-mounted installations. It supports the established practice of using filters to reduce noise levels at wide (high) offsets for improving test margins.
  • Use the Filter only at 1 GHz. It rejects phase noise at offsets greater than 1 MHz from the 1 GHz carrier (both sidebands are rejected). Use the filter only when the phase noise specification of the 96xx RF Reference Source is not considered sufficient for the target workload. Only the highest performance spectrum analyzers are likely to require the filter. The filter connects in series with the umbilical lead of the 9640A-50 or 9640A-75 Leveling Head. Use the supplied mounting kit to conveniently attach the filter to the front left handle of the Reference Source. This mount is fully compatible with the Y9600 Rack Mount accessory.

Test Equipment Asset Management Software

• MET/TEAM calibration management software enables you to:
  • Manage all aspects of your calibration operation with one paperless solution
  • Improve productivity and reduce operating costs
  • Maintain compliance with regulatory standards
  • Configure and customize for your business rules
  • Report to meet a wide range of requirements
  • Schedule maintenance events
  • Perform batch receiving
  • Create, track and close work orders
  • Track assets as they move through the lab
  • Create and print calibration reports
  • Maintain an audit trail
  • Manage shipping information
  • Track customer and vendor information

Calibration Management Software

• • Big productivity benefits with an intuitive interface
    • Automate
      • Automate calibration of a wide range of electrical and RF calibration standards and test equipment
      • Templates help you perform, record and report on manual calibration tests
    • Improve productivity
      • Increase workflow throughout up to 80% compared to manual approach
      • Reduce time to calibrate spectrum analyzer equipment from 11 hours to 1 or 2
    • Perform controlled, consistent tests
      • Create validated calibration procedures
      • Comprehensive library of thousands of automation procedures
      • Store all test parameters and traceability