Piping Cleaning Trainer
(PL106)
- Limitations of flushing according to technical regulations
- Introducing contaminants into the system
- Automatic mixer, thermostatic mixer
- Recommended flow pressure: 1 ~ 6bar
- Min. Flow rate: 5l/min
- Max. Water temperature: 90°C, with temperature safety stop
- Two handle mixer
- Simulated hot water preparation
- Safety fittings
- Quick-action bleed valve
- Safety valve on the hot water preparation unit
- Pipes: Cu / transparent plastic
- 2x cold water connection
- 10x hose connection with quick-release coupling
- Piping Cleaning Trainer (PL106)
- Hard Copy User Manual
The piping cleaning trainer demonstrates the flushing process to trainees, allowing them to learn how to clean the remnants of solder or sealant from drinking water pipes.
- The flushing process is intended to remove contaminants, such as remnants of solder or sealant, from drinking water pipes.
- The individual pipe circuits must be flushed from bottom to top
- The transparent pipe sections allow trainees to observe the flushing action.
- Flushing is performed via two lines that are connected to a cold water supply.
- Contaminants are introduced into the pipe system through openings with shutoff valves.