The AC Kit training system consists of AC loads, AC meters as well as energy monitor module. Using this training kit, trainees can apply loads and record all of the corresponding readings on the provided meters whether it›s in single phase or in three-phase.
- AC Load (RE111.01)
- This Module is designed to simulate a real AC Load, using two different types of lamps
- The module consists of two Halogen lamp and two LED lamps.
- This module helps our students to access different load wattage on the experiment.
- Technical Data:
- Halogen Lamp
- Voltage Required: 220V
- Watt: 50 W
- LED Lamp
- Voltage Required: 220V
- Watt: 5 W
- AC Metering Panel (RE111.02)
- Digital Current Meter:
- Two independent Channels.
- Each channel has two Ranges (5A peak Range – Accuracy +-1% / 10A peak Range – Accuracy +-1%).
- Channels protected against over current
- Digital Voltage Meter:
- Two independent Channels.
- Each channel has a selectable Range of (60V peak Range – Accuracy +-1% / 300V peak Range – Accuracy +-1% / 600V peak Range – Accuracy +-1%),
- Channels protected against over voltage
- Communication:
- Graphical Display:
- Touch LCD 5inch, 800x480 pixel display
- Monitoring 2 voltage channels and 2 current channels,
- Configuring Measurement Ranges
- Power Supply:
- Energy Monitor Module (RE111.03)
- The system is supplied with two energy monitor modules.
- The three-phase measuring instrument permits the measurement and display of relevant power network parameters.
- It is able to measure single, two-phase or three-phase measurements. The “smart meter” acts as a digital electricity meter where end customers are connected to the grid in order to measure electricity consumption
- Technical Data
- Three-phase measurement of current and voltage: 3x400 V/5 A
- Max. measurement values
- Voltage P-P: 690 V
- Current: 5 A
- Operating voltage
