STM32 ARM Microcontroller Trainer
(RM-006)
  • STM32 ARM Microcontroller Trainer - (RM -006)
  • Main Kit (RM-06.1)
    • Type A Communication (RM-006.1.1)
    • Type A Actuator Kit (RM-006.1.2)
    • Type A Sensors Kit (RM-006.1.3)
    • Type-B Plug-in Modules (RM-006.1.4)
  • Programming software
  • Sample codes
  • USB cable A to B 1.5 m
  • RS232 cable 1.5 m
  • Hard copy user manual
  • Laboratory PC

Microcontroller kit is a benchtop kit that tends to familiarize the trainee with the different microcontroller components and connections. The kit is designed in the form of a lightweight portable Plastic case equipped with a real microcontroller and various electronic components related to its functions to allow wide ranges of experiments. Kit is based on STM32 ARM Microcontroller (STM32 ARM Cortex-M3 and Cortex-M4, M7, M0 devices) STM32F407 Microcontroller Included as the main microcontroller. Kit provides a large number of interface modules with configuration switches which open a wide range of experiments . With the In-Circuit Debugger/Programmer, just what you need is a USB cable to PC, no more additional hardware components to apply programming codes . Easy to use and friendly kit.

                                     
  • STM32 ARM microcontroller trainer consist of
    • Embedded ST-Link programmer / debugger (Access via USB port with indication LEDs)
    • Microcontrollers supported as individual modules that plugged in to the Kit ( default Plug-in module with kit «STM32F407 SMD Module ).
    • The trainer is also support these families of microcontroller (not included, refer to optional section) STM32 ARM cortex-M3 and cortex-M4, M7, M0 devices
    • Integrated fixed DC power supply module: + 3.3V, +5V, +12V, -5V, -12V (fuse protected) with led indicators - accessed via 2mm sockets (for external modules)
    • Integrated variable DC power supply module: +1.25VDC to +5VDC or -1.25VDC to -5VDC (fuse protected) with led indicators - Accessed via 2mm sockets (for external modules)
    • 8 digital switches
    • Integrated pulse generator From 10 Hz: 2 Hz : 1KHz
    • Pullup and pulldown resistor for every microcontroller pin (selectable between (Pull-up, floating, Pull-down)
    • Indication LED for every microcontroller pin
    • Pushbutton for every microcontroller Pin (selectable between VCC or GND signal)
    • Dip switches for configuring microcontroller I/O Ports
    • Pin header male/female groups for every microcontroller PORT for external connections
    • Programming IDE: supports STM32CubeIDE integrated development environment and mikroC for ARM
    • Includes ready to run codes for all included trainer components with stm32cube ide
    • 1 x AC power source socket (fuse protected) With ON/OFF switch
  • Main Kit Code : (RM-006.1) Type A Communication Kit
    • 1 X UART To USB Interface Type-A Plug-in Module
    • 1 X RS232 Interface Type-A Plug-in Module
    • 1 x Ethernet Type-A Plug-in Module allows you to develop Ethernet applications.
    • 1 x Audio Type-A Plug-in Module
    • 1 x MicroSD Card Type-A Plug-in Module
    • 1 x TFT touch screen enables you to develop multimedia applications
    • 1 x (2 x 16 LCD Module) contrast adjustable Via Potentiometer
    • 1 x (64 X 128 GLCD module) contrast adjustable Via potentiometer
    • 1 x I2C EEPROM type-A plug-in module
  • Type A Actuator Kit Code : (RM-006.1.2)
    • 1 X Seven Segment Type-A Plug-in Module
    • 1 x piezo buzzer type-A plug-in module
    • 1 X speaker type-A plug-in module
    • 1 x type-A plug-in module
    • 1 x stepper motor interface Through ULN2803
  • Type A Sensors Kit Code : (RM-006.1.3)
    • 2 x potentiometers to simulate analog I/P to microcontroller
    • 5 X Type-A Plug-in Modules Holder ( For Type-A Plug-in Modules )
  • Type-B Plug-in Modules Code : (RM-006.1.4)
    • 1 X Type-B Plug-in Modules Holder ( For Type-B Plug-in Modules )
    • 1 x USB socket type B (for programming/debugging) with status LEDs
    • 1 x USB socket type B (for direct USB connection)
  • STM32 ARM cortex-M3
  • cortex-M4, M7, M0 devices
  • WIFI
    • Signal Type : UART
    • Signal Level :5V or 3.3V
    • SMD
  • Audio In & Out
    • Signal Type : SPI
    • Signal Level : 3.3V
  • SD Card
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Ethernet
    • Signal Type : SPI
    • Signal Level :5V or 3.3V
  • Bluetooth Module
    • Signal Type : UART
    • Signal Level :5V
  • RF Transceiver
    • Signal Type : SPI
    • Signal Level :5V
  • UART To RS-232
    • Signal Type : UART
    • Signal Level :5V or 3.3V Selectable
  • Serial EEPROM
    • Signal Type : I2C
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • Relay
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
    • Address Configurable
  • RGB LED
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Limit Switch
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Push Button
    • Signal Type : Digital
    • Signal Level :5V or 3.3V Selectable
  • Laser
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • 8x8 LED Matrix
    • Signal Type : SPI
    • signal level : 5V or 3.3V
  • Light Sensor (CDS Photoresistor)
    • Signal Type : Analog and Digital
    • Signal Level :5V or 3.3V Selectable
  • Tilt Sensor
    • Signal Type : Digital- Signal
    • Level : 5V or 3.3V Selectable
  • Mercury Sensor (Switch):
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Reed Sensor (Switch)
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Flame Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Touch sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Opto Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Knock Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Thermistor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • Humidity And Temperature sensor (DHT11)
    • Signal Type : Digital
    • Signal Level :5V or 3.3V
  • Vibration Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Water Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • DS18B20 Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • Barometer Sensor
    • Humidity, barometric pressure and ambient temperature BME280
    • Signal Type : I2C
    • Signal Level : 3.3V
  • IR Reflective
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • IR Receiver
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • LM35
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Sound Sensor
    • Signal Type : Analog and Digital
    • Signal Level : 5V or 3.3V Selectable
  • GY-87 Sensor
    • 3-axis Gyroscope + 3-axis acceleration + 3-axis magnetic field + air pressure
    • Signal Type : I2C
    • Signal Level : 5V or 3.3V
  • Ultrasonic Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V Selectable
  • PIR Sensor
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • Keypad 3 X 4
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V
  • 7 Segment
    • Signal Type : Digital
    • Signal Level : 5V or 3.3V