Temperature & Pressure Measurements System
(TD102)
- Familiarization with most common types of temperature and pressure sensors & their principle of operation.
- Measurements of boiler water temperature using (PT100 RTD, PT1000 RTD & TC)
- Studying the Seebeck effect of thermocouple.
- Measurements of pressure using different types of pressure gauges.
- Introducing trainees to the thermoelectric effect.
- Heater
- Display: LCD
- Power: 515 W
- Heating output: 500 W
- Voltage: 100-120/200-240 V, 50/60Hz
- Stirring positions: 1
- Max. stirring quantity (H2O): 3 Liter
- Stirring speed range: 200 to 1500 RPM
- Speed display resolution: 1 RPM
- Temperature range: Room temperature to 280°C
- Temperature accuracy: ±1°C
- Regulator
- Refrigerant: Air
- Maximum working pressure: 0.95Mpa(135psi).
- Pressure regulating range: 0.05~0.85MPa (7-121psi).
- Guarantee pressure resistance: 1.5Mpa (213psi).
- Environment &Fluid Temperature: 5 to 60oC.
- Oil Mist Detector Oil for Advice: ISOVG32.
- Air compressor
- 10 bar
- 12 V
- Vacuum pump
- 1/4 HP
- 5 Pa
- Temperature sensor PT100 RTD
- Liquid probe, stainless-steel shell (silicon cable)
- Range: -60 to +150°C
- Accuracy: ±0.5°C
- Vacuum gauge
- Range: -100 mbar to 0 mbar
- Resolution: 20 mbar
- Glycerin pressure gauge
- Liquid: Glycerin
- Range: 0 to 10 bar
- Resolution: 0.1 bar
- Pressure gauge 1
- Range: 0 to 10 bar
- Resolution: 0.25 bar
- Pressure gauge 2
- Range: 0 to 10 bar
- Resolution: 0.25 bar
- Temperature & pressure measurements system (TD102)
- Hard copy user manual
Temperature & pressure measurements system is designed to introduce the trainees to the most common types of pressure gauges and temperature sensors used in industrial applications . Also,it allows them to study their principle of operation and the most suitable applications for each type. In addition ,trainees will enhance their skills in taking the readings through a wide range of laboratory experiments.
- The system consists of a stand-alone training unit in addition to an accessories kit included in the unit drawer.
- The educational unit features various types of temperature and pressure measurement devices.
- Pressure measurement devices included are:
- Dry pressure gauge
- Liquid-filled pressure gauge
- Vacuum pressure gauge
- Bourdon Tube
- The latter is used to observe the operating mechanism & internal construction of the pressure gauge.
- The system is equipped with necessary components needed to perform pressure measurements experiments such as:
- Air compressor
- Vacuum pump with its lubricant
- Filter-regulator unit
- Air compressor used to supply air to the dry and glycerin type pressure guages.
- Vacuum pump used to create vacuum needed for the vacuum type pressure gauge.
- Filter-regulator unit is used to control the air pressure and suction.
- Temperature measurements sensors included are:
- PT100 RTD sensor.
- PT1000 RTD sensor.
- Thermocouple K-type.
- NTC Sensor.
- The system is equipped with necessary tools needed to perform temperature measurements experiments such as:
- Heater & beaker
- 3 Temperature digital displays
- One digital display is used to display temperature of both PT100 sensor in celsius (°C).
- The other digital display is used to display the temperature of the thermocouple in celsius (°C).
- The last digital display is used to display the temperature of the NTC temperature sensor in (°C).
- The trainer also include a digital display which used to display the temperature of the thermocouple in millivolt.
- The heater provided is equipped with a magnetic stirrer to ensure a homogeneuous temperature distribution through the water molecules inside the water beaker.
- The heater is equipped with a knob to set the temperature, and another knob for setting stirring speed, in addition to a digital display to display the temperate of the PT1000 and the stirring rate.
- The educational unit operation module contains on/off switch, air compressor switch, vacuum pump switch.
- Emergency switch is used to disconnect the unit in any emergency.