Classic Control Trainer

(MCC101)

1.Operation panel, 2.Selector switch module, 3.ON/OFF module, 4.Indication LED’s module, 5.Push button module , 6.Emergency switch module, 7.Limit switch module, 8.Thermal overload module , 9.Motors module, Digital meter,11.Inverter module, 12.Electronic overload module 13.Digital counter module, 14.Timers module, 15.Relays module, 16.Contactors module, 17. Process (schematic & modules).

1.Process tank (lower), 2.Centrifugal pump, 3.Pressure switch, 4.Non-return valve, 5.16-pins plug ( to connect between the two units , 6.Solenoid valve, 7.Process tank (upper), 8.3 level sensros , 9.Drain valve, 10.Manual valve.

Studying function of classic control components.
Understanding the electrical connections of classic control components.
Differentiate between single-phase and three-phase connection.
Control circuit of a motor operation
Control circuit of a motor operation with overload
Power and control a motor using pushbutton & LEDs
Power and control a motor from Two different Places
The control circuit of reversing direction of rotation of a motor
Power and control circuits of two motors provided that one of them only operates only when the other is already operated.
Power and control circuits of two motors provided that one of them only operates when the other is shut off
Power and control circuit of two motors using ON/OFF switches and timers
Power and control circuit of two motors using ON/OFF switches and timers then stopping them both after a certain time
Power and control circuit of two motors using ON/OFF switches and timers then stopping the first motor after a certain time
Power and control circuit of operating
two motors alternately with a certain time interval
Control circuit of starting a motor using star/delta connection.
Control circuit of controlling motor speed using an Inverter
Measuring speed using digital pulse meter
Control circuit of limit switch with digital counter
Controlling liquid pressure and flow using pressure switch , level sensors , pump and different valves.

Circuit Breaker
- 400 V AC
- 4 poles
Motors
- 3 phase induction motor: AC
- 1 phase induction motor: AC
Sensors
- Photo sensor
- Proximity sensor
- Limit Switch
Push Buttons
- N.O./N.C. contacts
Electronic Overload
- Thermal protection adjustment range:
  2.5- 4 A
- Tripping threshold: 1.14+/-0.06 Ir
Contactor
- 3 Pole, 3 NO, 9A, 4KW, 24 V DC Coil
  Tachometer
- Supply Voltage and Power: 230 V ~
  (+%15) 50/60 Hz. 1.5 VA
- Sensor Inputs: NPN or PNP input type
- Accuracy: 0.01%

Digital Counter
- Counting speed & input: 1 / 30 / 1 K /
  10 Kcps, Contact, Non-contact
- Power voltage: 00 V - 240 V DC / AC
  50 – 60 Hz (± 10%)
Pressure & Level Control
Timer
- Control time setting range: 0.05 sec to 100 hours
- Power ON start type
- Return time: max. 100 ms

Classic control trainer (MCC101)
Hard copy user manual

Digital content (BI01)

Download Catalog

Description
Technical Details

Classic control trainer (MCC101) is designed with a main aim of demonstration the concept of industrial automation using components of classic control. The system is consists of two main units, first one is the system control unit which includes industrial classic control components , powering and measuring devices, digital displays in addition to three motors to be controlled. The second unit is an experimental module features an industrial automation application that consists of a centrifugal pump, 2 water tanks and control panel as an extra exercise. Using safety connecting cables trainees will be able to connect between modules for experimentation.

The trainer consists of two main units connected together to power the second unit from the main control unit using a cable.
First unit is the operation & control unit that includes all classic control components, while the other unit features a scaled-down industrial application that consists of a closed loop process of controlling water pressure in a tank.
Main unit operation module is equipped with ON/OFF switch, emergency switch, a circuit breaker & 3-phase power supply.
Modules for classic control components included in the main unit are:
- Limit switch module
- Emergency switches module
- Push buttons module
- Indication LEDs module
- ON/OFF switches module
- Selector switches module
- 3 Pole relays module
- Contactors module
- Thermal overload module
- Electronic overload module
- Digital counter module
- Digital pulse meter module
- Inverter module
- Timers module
- Two- 3phase motors
- Single-phase motor
Terminals of each module are displayed in different colors banana sockets to allow connecting between components.
The main unit also includes a schematic diagram of the industrial process for better understanding of the system and to help operate the process in the right sequence.
Modules with test points for the industrial process components are included in the control panel such as:
- Pump module
- Pressure switch module
- Level electrode module
- Solenoid valve module
- Electrode level sensors
Each of the 3 electric motors provided at the main unit is equipped with a transparent cover on the rotating part to ensure system safety during training.
A speed sensor on each motor shaft to measure its rotating speed.
The single-phase motor is equipped with a capacitive proximity sensor near to its rotating shaft used to measure the motor speed of rotation in a certain method and display it on the digital pulse meter.
The 1st three-phase motor is equipped with an inductive proximity sensor near to its rotating shaft used to measure the motor speed of rotation in a certain method and display it on the digital pulse meter.
The 2nd 3-phase motor is equipped with a capacitive proximity sensor near to its rotating shaft used to measure the motor speed of rotation in a certain method and display it on the digital pulse meter.
Using the classic control components; the trainee will be able to control motors direction of rotation also starting the motors using different methods.
The industrial process unit contains a pressure switch to protect the pump from high pressure, a solenoid valve to control the liquid flow
The process tank (upper) includes 3 Electrode level sensors,1st electrode is responsible for starting the pump to fill the tank, while 3rd electrode is responsible for stopping the pump and opening the solenoid valve to drain water to the lower tank till the water level is at the height of 2nd electrode.
The main function of this unit is to measure the water level in the upper tank using the electrode level sensor. When the water level reaches a certain level that has been set by electrode level sensor, the pump stops driving water from the lower tank to the upper tank.

Digital content (BI-01)

BI-01

Classic Control Trainer

(MCC101)