Machine & Drive Lab Main Frame can operate both AC and DC machines and transformers up to 1 KW, it is designed to be combat and can be expanded to enable the trainees to add up to 10 modules, by using a set of interchangeable modules the trainees can execute different experiments.Machine & Drive Lab Main Frame can operate both AC and DC machines and transformers up to 3 KW, it is designed to be combat and can be expanded to enable the trainees to add up to 10 modules, by using a set of interchangeable modules the trainees can execute different experiments.
- The Unit contains a vertical panel divided into two sections a control section and an aluminum panel section used for fixing the experimental modules. In addition to horizontal work bench.
- The control panel section is also provided with circuit breakers to protect the unit, overload LED that lights up when the unit is overloaded, and emergency button and On/Off switch to operate the unit
- The control panel includes a knobs to control the values of AC and DC voltage power supplies.
- The training system can supply machines with power up to 1 KW.
- Universal power supply (ML100.01)
- Three-phase fixed power supply
- Output voltage: 3x 400VAC, 50-60 Hz
- Short circuit protection with 3-pole
- CB up to 25A
- Over and Under Voltage Protection
- Phase Sequence Protection
- Motor protection switch adjustable from 20A to 25A
- Output from 4mm banana safety sockets L1 ,L2,L3 ,N AND PE
- Universal AC/DC Variable Power Supply
- Technical Data:
- Current: up to 6 A
- Voltage: 0 : 400VAC / 0 : 220 VDC
- Short circuit protection
- Overload protection
- Output from 4mm banana safety sockets
- AC : L1, L2, L3, N and PE
- DC : +VE, -VE
- Variable DC Power Supply
- Technical Data:
- Output current: up to 2.2 A
- Output voltage: 0 : 220V
- Short circuit protection
- Maximum output power 500W
- Output from 4mm banana safety sockets +VE, -VE
- Fixed DC Power Supply
- Technical Data:
- Short circuit protection
- Output current: 2A
- Output voltage: 220V
- Output power: 440W
- Output from 4mm banana safety sockets +VE, -VE
- Main Modules Kit Code: (ML100.02)
- Digital Meter (ML100.02.01)
- Technical Data:
- Input voltage: 220V, 50-60 Hz on 4 mm safety banana socket
- RS-485 interface
- 2-Channels AC / DC Current Measurement
- Measurement Range Up to 5 A
- 2-Channels AC/DC Voltage Measurement
- Voltage measurement: Up to 250 V - 500V
- Fuse protection
- Torque meter (ML100.02.02)
- Technical Data:
- 220 V, 50-60 Hz Supply from 4 mm banana socket
- RS-485 interface
- Input for load cell connection via special connector
- Cut-Off Switch Module 3-Pole (ML100.02.03)
- Technical Data:
- Switch position: 0 - 1 (rotary switch)
- Contact rating: 690V, 16A max.
- Inputs/outputs: 4mm safety sockets
- Contactors and switching circuits training set (ML100.02.04)
- With this set, basic contactor circuits can be assembled that include protective and operating elements.
- Sub-assemblies:
- 4 X Latched push-button switches, 1 NO/1 NC
- 1X Set of Four indicator lamps (Red , Blue, Yellow and Green)
- 3X Main Contactor, 3-Pole, with Auxiliary Contacts Block (2 N.O / 2 N.C)
- 1 Remote pulse switch, 1 changeover contact
- 2x Multi-Function Timer ( On-Delay, Flicker and Interval Modes)
- Range: (0.5 sec -10 hours) Adjustable
- 1 X Line circuit breaker, 3-pole
- 1X Line circuit breaker, single-pole
- 2x Red Push Button (1 N.O/ 1 N.C)
- 2x Emergency Stop Push Button (2 N.C)
- Technical Data:
- Nominal power contacts: 230/400VAC,16AC
- Nominal control contacts: 230VAC, 5AC
