Advanced BEDO DAQ System
(EC110)
- 5 analog inputs
- 2 analog voltage inputs A and B on 4-mm safety sockets (electrically isolated)
- Resolution: 12 bits
- Measuring ranges: ±0.1/±0.3/±1/±3/±10/±30/±100/±250 V
- Measurement error: ±1% plus 0.5% of range end value
- Input resistance: 1 MΩ
- Scanning rate: up to 1 MHz per input
- Amount of measured values: nearly unlimited (dependent on PC) up to 10,000 values/s, at a higher measuring rate max. 200,000 values
- Pre-trigger: up to 50,000 values per input
- 1 analog current input A on 4-mm safety sockets (alternatively to voltage input A)
- Measuring ranges: ±0.03/±0.1/±0.3/±1/±3 A
- Measurement error: voltage error plus 1%
- Input resistance: < 0.5 Ω
- Scanning rate: up to 1 MHz per input
- See voltage inputs for further data
- 2 analog inputs at sensor box connector sites A and B (sensor boxes and sensors can be connected)
- Measuring ranges: ±0.003/±0.01/±0.03/±0.1/±0.3/±1 V
- Input resistance: 10 kΩ
- Scanning rate: up to 500 kHz per input
- See voltage inputs for further data
- The technical data will change depending on a connected sensor box. In this case CASSY Lab 2 automatically detects the possible measurement quantities and ranges when a sensor box is attached.
- 4 timer inputs
- 32-bit counters at sensor box sites A and B (e.g. for GM box, timer box or Timer S) Countin g frequency: max. 1 MHz
- Time resolution: 20 ns
- 5 LED status indicators for analog inputs and USB-port
- Colors: red and green, according to status
- Light intensity: adjustable
- 1 change-over relay
- (switching indication via LED)
- Range: max. 250 V/2 A
- 1 analog output
- (LED switching state indicator, e.g. for holding magnet or supplying experiment)
- Variable voltage range: max. 16 V/200 mA (load ≥ 80Ω)
- 12 digital inputs
- (TTL) on sensor box sites A and B (at present only used for automatic sensor box detection) 6 digital outputs
- (TTL) on sensor box sites A and B (at present only used for automatic switching of a sensor box measuring range)
- 1 USB port for connection to a computer
- 1 CASSY bus for connecting additional CASSY modules
- Advanced BEDO DAQ System (EC110)
- Hard copy user manual
Laboratory PC
Advanced BEDO-DACI presents a comprehensive solution for data acquisition, catering to a wide range of application needs. With support for up to 32 single-ended or 16 differential analog inputs, along with up to 8 single-ended analog outputs and an ample provision of up to 67 digital I/O lines, it ensures versatile connectivity and efficient data collection capabilities. Furthermore, BEDO-DAQ excels in precise temperature sensing and measurement tasks. Its LabVIEW-based software package streamlines the process of configuration, data acquisition, and analysis, offering an intuitive user experience. Additionally, its dual-mode operation allows users to seamlessly adapt to specific application requirements, enhancing flexibility and usability for various data acquisition tasks.
- This device is designed to record measurement data and can be connected to a computer, another module, or a display via the USB port.
- It supports cascading, allowing sensor modules and power modules to be combined in a series.
- It offers 3-fold electrical isolation, with 4- mm inputs A and B and a relay R.
- Measurement can be performed simultaneously at the 4-mm inputs and sensor box connector sites, providing 4 channels.
- The device supports cascading of up to 8 modules to expand inputs and outputs.
- Additional sensor boxes can be added to provide up to 8 analog inputs.
- It features automatic sensor box detection for easy plug and play functionality.
- The device is microprocessor-controlled and has an operating system that can be easily updated via software for function enhancements.
- It can be used as a bench-top, console, or demonstration unit and is compatible with CPS/TPS panel frames.
- The voltage supply is 12 V AC/DC, which can be connected via a cannon plug or an adjacent module.
- Developer information, LabVIEW, and MATLAB drivers are available through the manufacturer's internet homepage.